🚙 XtremeAmazing EP27 FL27 Electronic Flasher Relay: Hyper Blink Fix for LED Turn Signal Bulbs in Vehicles Review

Like everyone else, I've been following all LED trends. The factory turn signals in my F250 could not cope with the minimal power consumption of the LEDs. It worked fantastically. *Note* There are tons of videos on YouTube showing multiple models. I highly recommend this turn signal.

The turn signal worked fine when the turn signals were on - but when the car was off it kept clicking (as if the turn signal was still on). I had to pull it out - obviously something is wrong if it keeps working without input. The funny thing is that it didn't click when the car was running - only when the ignition/power was off.

The website says it's compatible with my 2007 F250 but as others have described it doesn't stop blinking. The LEDs are flashing at the correct rate, but as soon as I turn off the turn signal, the relay keeps flashing, but the light doesn't come on. Even if I turn off the car, it continues to work. In addition, the height is larger than the original. The turn signal cover no longer closes. Needless to say, the product is being returned.

Works great! One thing though, the male end that fits into your truck braid fits perfectly. The outer case doesn't look like it, but it works fine. The mines have been going for about a week now and I haven't had a single burnt out bulb and the wiring is fine and doesn't get hot in use and the unit itself doesn't get hot when left on for 10 minutes. . So I definitely recommend this product. God bless!

Junk Wrong connection inside. Took the dash apart to get at the turn signal as is. I removed the old turn signal assembly, once installed the 4 way turn signals came on and stayed on even with the hazard switch in the off position. The installed old flash driver worked fine. It's a good idea not to install pull-up resistors for the turn signal bulbs, but I don't think the LED turn signal will work at all now. 1 hour I will never walk again.

Same problem after finally finding the thing under the dash but it didn't work. As soon as I plugged it in it started clicking, I made sure my 4 way switch is off. I turned the key and checked the turn signals, they were working at normal speed so the problem was resolved. However, after I turned the key, my turn signals continued to work. Since Revain was kind enough to refund my money without asking for a refund, I'll take a look to see if there are any obvious errors.

I replaced all the exterior headlights on a 2001 Ford F-150 with LEDs. This caused the blinker hyperflare issue. I tried reverse lights with built in capacitors but they only lasted 6 months. I replaced them with switches that built a capacitor into the assembly itself, but they still suffered from hyperflare. I dreaded the thought of having to connect wires to install a capacitor ON EACH LINE. This one flashing relay solves all those problems, just plug in and go! (By the way, this relay is…

UPDATE: According to other reviews, constant clicks have started, reduced to one star. Taillight bulbs replaced with LEDs in 2002 F250. I will always remember that during my annual school exam, my school nurse encouraged me that size matters and that one day I will be very popular. 35 years later she was right again. Relay arrived early, fair price, installation instructions on YOUTUBE were correct. However, as I am used to personally, the unit is larger than the standard OEM and therefore the…