🖥️ Zalman K1 Rev. B ATX Gaming PC Case with Addressable RGB Front Panel, Tempered Glass Side Panel, Includes (1x) ARGB 120mm Fan Rear and (1x) Black 120mm Fan Front (aRGB Panel) Review

I took it with an eye on a new PC for a ryzen 3000. At the moment, the system is at 2600k 4.7 GHz 1.376 volts for true spirit 140 + gth 970 1501/8192. So far, there is only a regular blowing cooler in the case, the temperatures are quite sane under stress tests. Now think about how best to organize ventilation, so that it would be quiet and not clutter up. I am also braiding 24-pin and 8-pin cables in order to bring them out beautifully in the middle at the front panel, there is just a suitable

In general, I did not build high hopes, but when I saw what it was like to the touch, it became a thrill to collect. There are enough holes for wiring, the back cover closed without problems. The body is really cool and unexpectedly large. I liked everything

Pros below: All as in the description no more no less. Not noisy, cable management is 4 out of 5. I was pleased with the tempered glass with darkened edges, the skeleton of the case itself is not visible - a good solution. He himself is small, when he ordered, he thought that a huge fool would come, but no - very nice. Magnetic filters for easy cleaning. The packaging it comes in is also good. The kit comes with bolts and a cloth for glass (a trifle, but nice) The case is in a separate package,

Has some pros The price to performance ratio is perfect in my opinion. Lots of front lighting options Different cons: In general, the quality is 3+, if it were not for the backlight, then the price of this case is 1k maximum. Very thin and flimsy hardware. Glass from the upper left corner does not fit snugly. Cable management is sad. ASUS ROG STRIX Z390-E GAMING did not fit into the case the first time because of the backlit lining, I had to cut a piece of the rib inside the case from above…

So completely satisfied, before that there was a super tower body all metal, compared to this it's just huge. Now it has become so small that you can put it wherever you want. The backlight shines differently. Pros below: Everything fell into place without problems. Lids open on both sides. Cons: Haven't found it yet. But the cat walks around the body and presses the on / off button with its paws and the computer turns off. Since the buttons are located on top.

It may not suit the lack of the ability to install a CD, but I still do not have one. For the money - the only case in which you can put a CPU cooler with a height of more than 170 mm - this was decisive when buying. Its pros: - the ability to install a video card and a large processor cooler; - decent quality; - the ability to install a large number of fans (I counted up to 8 pieces, one included); Has some cons: - only two trays for 3.5" HDD; - the cable is not well suited for flat PSU…

Noisy cooler. I looked through the glass, saw the wiring hanging on the blades of the bag, corrected the defect with a coupler. Easy to assemble and disassemble. He removed the glass in 20 seconds, tinkered, put the glass back just as quickly. Excellent solutions for mounting hard and ssds, as well as a separate compartment for the PSU. The ventilation grilles are closed with a fine mesh on a magnet. The PSU is also covered with a removable filter with a very fine mesh, which perfectly prevents

Above is a radiator 270x120x50 mm. If you have large RAM heatsinks, it may not fit, keep this in mind if you put your own. Also, in front of the case, where you need to put the cooler, there is a metal mesh, because of it the cooler makes noise (you can break it off). The glass is thick, heavy, probably because of this it is not on magnets, there is a small gap between it and the case.

It's nice to look at the rgb package of your PC - for those who have nowhere to put their money and don't want to get a Christmas tree for the new year. Different pros: There is still a free rgb fan. The second fan is without, but works just as kosher. Not too bulky body. Glass pleases, but quickly gets dirty (fortunately there is a rag). For 3k at a discount - I would say that a cool option. Its cons: The glass may stick out a little for the case itself, but this is not critical. I tried to…

You can’t adjust the cooler speed and backlight, because of the small holes on the sides, the air flow is weak, the complete cooler can’t cope with heat removal, it rattles a little, the PSU is too far from the motherboard and all the cables are stretched, I have two hard drives, and there are no ssd dampers for hdd , because vibration during loading is transmitted to the case, and these are key requirements for a normal case, for this money you can find much better, plastic in baskets is worse

I chose a case for a long time, I wanted a 162mm processor cooler to fit and that the case was not too bulky for a MATX motherboard. After a long search, I settled on this case: I was attracted by the fact that a processor up to 170mm can be placed in the case, outwardly I liked the design + side window. True, it is no smaller than my previous case, almost the same. In general, the body looks "spacious" It turned out to be more flaws, but I found what I was looking for: the cooler fit in, looks

If you don’t look closely, it looks normal, but if you pay attention to the fit of the glass, you can see the gap, it’s scary to tighten the screw so that the glass doesn’t burst, it turns out the chassis itself is crooked, and it’s crooked because it’s very thin, at first confused the backlight buttons and rewipe, because they are the same and very close to each other, even if the vision is good in the twilight, you can’t see how they are signed, because of the holes in the tunnel, warm air…

While collecting the mental compared with the Z9. The Z9 has a much easier assembly, but unfortunately it is obsolete due to a bunch of unnecessary compartments for 5.25 devices and the lack of usb 3.0. To be honest, K1 is disappointed. Pros: Stylish, many different connectors on the "muzzle", there are no "extra" 5.25 compartments, there is relatively much space inside. Got cons: 1. Stupid blue LED that shines clearly upwards. If you bend over and accidentally look at it when turning on or off

💲 Took for 4k (02/2022) ✒️ Good case with its discreet and at the same time attractive appearance Different pros: ⭐️ Affordable price ⭐️ Appearance. Style. ⭐️ Quality ⭐️ Cooling ✔️ Robust housing including glass. ✔️ 🔥 Defiant appearance. The backlight looks good, the colors of the front panel are quite pleasant. There are pre-programmed front panel lighting modes (about 10 including solid colors). Backlight control by a switch on the front panel. ✔️ Front USB 3.0 ✔️ Pretty good and quiet…

This case is one of my best investments. I recently moved from a full tower that had too much room to this average tower. The tempered glass panel is quite thick, around 0.3 to 0.5 inches. The front panel and part of the top are made of high-quality plastic, while the rest is made of high-quality steel. The backlight of the case can be changed quite easily via the RGB button on the I/O panel. The only problems/complaints are as follows.1). There are only Molex power connectors for the rear RGB…

A very nice case that has enough space for all the innards and the glass lets through RGB when the shield is installed and what's more

Can't complain about this case, real glass side panel, RGB lighting, power supply cover make cable management easier. Easy to use and looks great!

Can't complain about this case, Real glass backlight PSU cover facilitates cable handling. Easy to use and looks great!

This is a decent case for the money. This allows you to install a heatsink with an average memory heatsink height above. Crucial Ballistix etc. Plenty of room for expansion. 3-way SLI, Crossfire, etc. Magnetic dust shields are completely ridiculous. Both short ends of the windscreen have come loose from the windscreen. I have now thrown it on the fridge. The aRGB front bezel and included aRGB case fan look great in low light. BAD DESCRIPTION DOES NOT MENTION THAT THIS RGB LIGHT SPLITTER IS NOT…