- Superior cooling. Definitely the best choice under $80 for its price. Silence.
- It took a little fiddling with the installation. But if you follow the instructions, you'll be fine!
- Compact, Fits perfectly in MiniTower`e InWin IW-EMR020 next to the MSI N660 Twin Frozr graphics card At first I thought to take optim, but in the store I took the moneyback on thecomndition, if it does not fit and was satisfied. Itcomols well (the i5-2500k stone is not overclocked), the temperature of the hottestcomre during stress testing in AIDA64 did not exceed 48 degrees and this at acomoler speed of 700RPM! I think that if you remove the fancommpletely, then the picture will not change much. Another plus is that you can install a second fan on the hood (for those who don’t know, I’ll explain: the main fan blows into the radiator, and the second one blows out of the radiator, i. E. the fans blow in the same direction, and not at each other, as many people think) , but I think this is relevant only for especially burning and for decently overclocked processors. A good thermal paste is included, although it is only enough for one installation, so packaging in a bag is appropriate
- The fan is noisy, but not critical, i. E. at maximum speed, an unobtrusive rumbling clearly appears, but it is not particularly annoying, besides, I lowered the speed to 700 - silence I do not consider it a serious drawback, but I did not see rubber linings for the fan - and figs with them, they are not needed. And there was no fastening for a plastic clip for AMD sockets - in this case it makes sense to fasten it through the BackPlate, since the mass of the radiator is decent and standard AMD latches may not hold this unit. It is not very convenient that in order to tighten the fasteners, the fan must be removed from the radiator, but this is not so scary.
- Good cooling Price Possibility to install a second fan
- Mounting method is not always convenient
- Well, there are no words, just super - I say a little quad 8400 overclocking to 3570 mg (P 35 chipset) the temperature in osst (1 hour of the test) does not want to go higher (I'm shocked) 47-49 degrees. Damn without overclocking (the same test criteria) 40-41 degrees. idle 27 ! and that's a fact
- Absolutely not! .
- Low cost; Cools very well Quiet;
- Such a installation of the fan that every time you want to hang yourself on the power cord and end the suffering as soon as possible; Covers one RAM slot; Difficulty transferring to another mother;
- 1. Value for money. 2. Good workmanship. 3. Complete set. 4. Good fastening, everything is tight. 4. Excellent solution for medium systems.
- 1. Attention! For AMD owners, pay attention not to the mount. Read the comment. 2. No more identified.
- Cools perfectly, not so big, got into the 185mm case easily, didn’t take up slots for RAM. The fan can be placed on either side. Quiet - when you turn it on, there are doubts - did the computer turn on? )) In idle time, it’s also very quiet, like a laptop, in load (I didn’t look at the speed, but I noticed that it seems like there are 3 speed modes for the fan, at max it’s also quite quiet, well, in comparison With stock Intel it is much quieter. I took the price exactly for a thousand, at first I thought about liquid, but there the price is many times higher and you need a special case, and there is enough cooling for the performance.
- Sooo heavy, when I screwed it to the uterus, I thought if it would crack, until the end because of this, I also did not tighten the fixing screws to the uterus, nevertheless it cools perfectly. If you touch it already installed in the case, you feel that its weight makes itself felt - it seems that if you make a little effort, it will fall off the mother, there were even thoughts to put the case horizontally. . tam already easier.
- 1) Absolutely silent with a low-speed Scythe fan (SY1225SL12SL) instead of the standard one. 2) In my performance, acceptable performance. With the case open, Phenom x4 965 kept 30C in office tasks, 20 min stress test - 47C. Worse indoors: office - 44C, stress 5min - 60C. Let me remind you that Scythe spins 500 rpm, while the box has 2022. 3) Suitable for any 120mm fan. 4) Two fans are attached.
- 1) Fastening for AMD, in case of direct clips it promises dancing with a tambourine * (see comments). 2) The fan in the kit cannot be called quiet. Even using an adapter with a resistor that reduces the speed to 900-1200 does not really solve the problem. 3) It can’t cope without a fan, the load is immediately 63C (the ceiling of the processor is 62). However, even the slowest valve solves the problem. 4) Even in the reviews they write that the bolts are very flimsy, it is easy to break the thread.
- cools
- installation on AMD that is difficult to use
- Great cooling Quick setup and installation Price that is suitable given the quality of the delivery
- A bit noisy under Asus Q-fan
- Wonderfully calming
- native fan
- -Equipment; -Noiselessness; -Possibility of Installation of Two Vents.
- We were unable to find it.
- Effectively cools down hot 125W AMD processors
- At full throttle, it's quite noisy.