Header banner
Revain logoHome Page
πŸ”© 15pcs 1/425 zinc alloy threaded insert nuts with hex-flanged washer for wood furniture: hex drive head screw-in type embedded screw plug set by zrm&e logo

πŸ”© 15pcs 1/425 Zinc Alloy Threaded Insert Nuts with Hex-Flanged Washer for Wood Furniture: Hex Drive Head Screw-in Type Embedded Screw Plug Set by ZRM&E Review

3

Β·

Average

Revainrating 3.5 out of 5Β Β 
RatingΒ 
3.7
πŸ”© Power Tool Parts & Accessories, πŸ”§ Power & Hand Tools

View on AmazonView on Π―M

Media

(4)
img 1 attached to πŸ”© 15pcs 1/425 Zinc Alloy Threaded Insert Nuts with Hex-Flanged Washer for Wood Furniture: Hex Drive Head Screw-in Type Embedded Screw Plug Set by ZRM&E
img 2 attached to πŸ”© 15pcs 1/425 Zinc Alloy Threaded Insert Nuts with Hex-Flanged Washer for Wood Furniture: Hex Drive Head Screw-in Type Embedded Screw Plug Set by ZRM&E
img 3 attached to πŸ”© 15pcs 1/425 Zinc Alloy Threaded Insert Nuts with Hex-Flanged Washer for Wood Furniture: Hex Drive Head Screw-in Type Embedded Screw Plug Set by ZRM&E
img 4 attached to πŸ”© 15pcs 1/425 Zinc Alloy Threaded Insert Nuts with Hex-Flanged Washer for Wood Furniture: Hex Drive Head Screw-in Type Embedded Screw Plug Set by ZRM&E

Description of πŸ”© 15pcs 1/425 Zinc Alloy Threaded Insert Nuts with Hex-Flanged Washer for Wood Furniture: Hex Drive Head Screw-in Type Embedded Screw Plug Set by ZRM&E

Type: 35pcs 1/4*25 Threaded Insert Nuts With Hex-Flanged Washer, Provides a threaded socket for a wooden workpiece, similar to a wall anchor. Material: Made of high quality zinc alloy, which is resistant to rust and corrosion and provides strength, with good room temperature mechanical properties and wear resistance, can keep thread integrity after multi times use. Threaded External: Unique self-tapping designed external thread protrusions, contribute to tapping, bite into the wood with good tensile resistance, can effectively prevent the nut from either turning or pulling out. Hex Drive Head: Can be screwed in with a hex key wrench, and the flanged head prevents splitting of the surfaces and driving the insert in too far. Application: Suitable for pine, plywood, fiberboard, etc, have a good effect in the advanced furniture combination. Commonly used in home and office appliance and other projects.

Reviews

Global ratings 3
  • 5
    1
  • 4
    1
  • 3
    0
  • 2
    1
  • 1
    0

Type of review

Revainrating 5 out of 5

They work very well and grip the MDF

This is amazing hardware. I used it to attach the amp to an additional MDF box. The screws I used before kept falling out. Uses a few stainless steel mounting screws to make a clean install.

Pros
  • very well. Type: 35 Pcs 1/4*25 Threaded Insert Nuts with Hex Flange Washer, provides a threaded socket for woodwork, similar to a wall anchor.
Cons
  • Empty

Revainrating 4 out of 5

It's harder for me to screw them into the holes I drilled

This seems like exactly what I'm looking for, but a 1/4" drill bit doesn't just screw these parts in easily. I'll try using a 5/16" drill bit to see , if I can get an easier one in, hope it works!

Pros
  • . Material: Made of high quality zinc alloy, which is rust and corrosion resistant and provides strength, with good mechanical properties at room temperature and wear resistance, can maintain the integrity of the thread after repeated use.
Cons
  • small things

Revainrating 2 out of 5

It's hard to start. soft metal

The first pairs I used were very difficult to screw into the piece of wood. Being softwood it was also difficult to get them to start straight. After struggling with the first pair, I used a 1/2" tap to slightly widen the beginning of the 3-8" hole and the starting problem was solved. Care must be taken to keep the allen wrench straight and pressed into its socket as these sockets are quite soft and easily removed with a wrench.

Pros
  • Hex Head: can be screwed in with a hex wrench and the flanged head prevents splitting surfaces and over-threading the insert.
Cons
  • Other Other