🔧 Enhanced Power Steering Pressure Line Hose Assembly by ACDelco Professional Review

Excellent price for the hose and fits as expected. There were issues with the center mount, but the coupler couldn't fix anything. Before starting the car, make sure you bleed the line properly to let all the air out. I've been driving the car for a little over a month with no problems. Would buy again if I had to switch to another car, hopefully the one just fitted doesn't have to be replaced again.

Leak fixed. No hiss as some others have noted. This is because the air has not been vented properly. The correct procedure is to raise the front wheels, turn on the ignition, but do not start the engine. Move the wheels from left to right and back 10 times. Check if the liquid level has dropped. If this is the case, add liquid and repeat the process lower, the level will not go down anymore. Then lower the car and start the engine. I did not remove the original support bracket and used 12 gauge

Yesterday I replaced the original hose on my I35 which was leaking after 145km. It seems to have worked out fine, but I only drove to work once this morning. At first I was hesitant to buy a non-original hose, but the difference in price and the good reviews of this product convinced me to try it. I will briefly describe my experience so that others may benefit. I didn't use any special tools, just what was in the garage. Make sure you have a 24mm socket to loosen the banjo bolt. Here is the…