💻 Computer Components
6 Review
【RAPID COOLING】80mm high static pressure fan is suitable for 4U server chassis, inverter, GPU heatsink, solder fume extractor, radiators, etc; or as a replacemment fan for many products. 【POWERFUL FAN】High wind pressure design to get more concentrated and farther air flow; suitable in applications where need maximized airflow and a louder noise level is…
Read more about this product
6 Review
1 Piece fan and mounting screws & nuts. Rated Voltage:12V 0.06A; Speed: 4500RPM; Air flow: 4.95CFM; Noise:24dBA. Connecter: 3Pin; Cable Length: 25cm Or 9.8 inches. Bearing type: Sleeve Bearing ; Life: 35000 hours. Dimension: 40mm(L) x 40mm(W) x 10mm(H) / 1.55x1.55x0.39 in. per fan
6 Review
This relay module is 5V active low. Relay output maximum contact is AC250V 10A and DC30V 10A. Standard interface can be directly connected with microcontrollers. Working status indicator lights are conducive to the safe use. 4-channel relay interface board, which can be controlled directly by a wide range of microcontrollers such as AVR, PIC, ARM, PLC…
Read more about this product
6 Review
Compatible For:HP 15-AC 15-ACXXX 15-ac622TX 15-ac032no 15-ac033no 15-ac042ur 15-ac121dx 15-ac029ds 15-ac120nr 15-ac137cl 15-ac023ur 15-ac020nr 15-ac150ds 15-ac151dx 15-ac148ds 15-ac158nr 15-ac159ur 15-ac136ds 15-ac142dx 15-ac123ds. Part Number:813946-001. Power Connection: 4-pin 4-wire. Warranty: 6 months
6 Review
1. All-aluminum + anode sandblasting, with 45 ° inclined wind guide structure, more fit the chassis air duct, quickly take away the heat of SSD, mini size brings better compatibility. 2.Diversion-type all-aluminum heat sink with built-in thermal conductive silicone pad, which conducts heat quickly and avoids overheating and slowing down the SSD. 3. The…
Read more about this product
6 Review
The Digispark is an Attiny85 based microcontroller development board similar to the line, only cheaper, smaller, and a bit less powerful. With a whole host of shields to extend its functionality and the ability to use the familiar Arduino IDE the Digispark is a great way to jump into electronics, or perfect for when an Arduino is too big or too much…
Read more about this product
6 Review
Airflow adjustable and noise optimizable, With an AC [100-240V 50/60Hz Input] power adapter integrated a stepless speed controller [3~12V dc 2A max. output]. Cooling and Ventilating Solution, Centrifugal force for with 42.40CFM Airflow (max.) @Speed 2800RMP (max.) Noise 61.3dB-A (max.). Durable and Heavy Duty, Dual ball bearings and PBT+GF housing…
Read more about this product
6 Review
Thermally conductive adhesive tape is made of advanced thermal conductive PSA. They satisfy the demand of high adhesion and excellent thermal conductive efficiency by providing a preferential heat-transfer path between heat-generating components and heat sink or other cooling devices. High tacky thermal conductive PSA. Only pressure is needed to form an…
Read more about this product
6 Review
Nicelux thermally conductive adhesive tape is electrically insulative as a cleaner and better solution than thermal paste for sticking heat sink to heat source devices and conduct heat out in between. The applicable heat source devices mostly include but not limit to CPU, GPU, High Power LED, LED strip, microprocessor, semiconductor, power supply…
Read more about this product
6 Review
This module has a smaller size. It is more compact and saves space for your project. This board contains 11 digital input / output pins, all pins have interrupt / pwm / I2C / 1-wire and a micro USB connection. This board is 100% compatible with Arduino and WeMos and can be programmed in the Arduino IDE. WIFI development board, with 4 MB of flash memory.
6 Review
【New Fashion Design】120mm fully transparent diamond face chassis fan,With crystal diamond lamp belt, fully transparent main frame design, the refraction of light through the diamond face shows a cool and bright effect. 【Super multi-mode】 12 kinds of monochrome modes,colorful light mode, multiple automatic lighting effects.High-brightness lamp beads…
Read more about this product
6 Review
Portable Electrical DIY Set. A good exercise for students in electronic production. VOT-8 voltmeter kit by the key switch control in two-wire system or in the three-wire state work. Two-wire system (measured voltage is VOT-8 power supply), the measurement range of 3.5 to 25. Three-wire system (a set of 3.5 ~ 25V voltage for the VOT-8 power supply), the…
Read more about this product
6 Review
Product OverviewThe Keywishbot Micro:bit Compatible Starter Kit is a versatile and comprehensive electronic ultimate starter kit designed especially for kids and beginners in the field of computer components and programming. This kit is fully compatible with both Micro:bit V1 and V2, offering an excellent platform for learning and experimenting with…
Read more about this product
6 Review
ATmega328 microcontroller with Optiboot (UNO) Bootloader. Compatible with Arduino IDE. R3 shield compatible. USB Programming Facilitated by the Ubiquitous FTDI FT232RL. All SMD Construction. Input voltage - 7-15V 0-5V outputs with 3.3V compatible inputs. You'll also need a mini-B-to-A USB cable It powers the RedBoard and allows you to upload programs to…
Read more about this product
6 Review
Kuman screw shield is a terminal expansion board that can be screwed directly to the terminal on the thread. Reliable and convenient, It can be plugged into the controller for Arduino directly. It also offers a good olution for connecting more components for Arduino . New Vision compatible. Direct plug puzzle board, NO soldering needed
6 Review
NOTE:This item can not fit for PS4 CUH-10XXA -11XXA Series
6 Review
26 Projects for Raspberry Pi beginners: this Raspberry Pi starter kit comes with DVD tutorial which is perfect choice for beginners to learn Raspberry Pi, electronics and program. Python and C code are provided: it is esay for you to learn Raspberry Pi and C&&Python programming. CD ROM in the product box: all the files were pre-stored in the CD ROM…
Read more about this product
6 Review
Full-cover water block custom designed for the ASUS RTX2080 and RTX2080Ti Strix cards. 100% copper coldplate brings a higher level of thermal capacity. High flow engineering reduces flow resistance for outstanding cooling performance. Central-flow focused directly on the GPU-chip. Tailored viton rubber sealing. Proven in the automotive and aerospace…
Read more about this product
6 Review
♥Day & Night Vision:The camera is equipped with photosensitive resistance,built in IR-CUT, which enables the camera to automatically detect and recognize light to automatically switch between the night-vision and day-time shooting mode. Manual settings are not required, plug-in then it can be used. The advantage is that during the day, the photographs…
Read more about this product
6 Review
【Styles】Total 10 different computer screws, perfect for 2.5" SSD, computer case, power supply, motherboard, hard drives, fan and floppy/CD-ROM drives fixed installation. 【Material】Made of high quality brass, steel and fiber paper, steel with nickel and black zinc plated which have superior rust resistance and excellent oxidation resistance. 【Package…
Read more about this product