📚 Knape & Vogt KT-0134-1212SN Decorative Corner Glass Shelf Kit - 12 inch L x 12 inch W Review

They have held up well for over 2 years, but have always trembled a bit. I kept a maximum of two perfume bottles and a small decorative element. It's just a crash and I managed to catch it. If I broke both full perfume bottles, I would be angry. I realized something, things that are usually put on the shelves are far more valuable than the shelf itself. And above our heads are usually shelves with a bunch of items that you don't want to drop on them. In this way. Take shelf assembly and…

For those of you who just want to mount this shelf on a drywall floor, you need to understand that the mounting brackets are not stable when supporting a glass shelf. Their design is too narrow to withstand the twisting force of the glass and the objects placed on it. This is partly due to the drywall fasteners included in the kit. They are completely unsuitable for cantilever weights. I've tried heavier gauge drywall anchors, but the holes in the mounting brackets only fit small diameter…

I needed to install a mini cable box under my TV in the wall. After a lot of feedback on Revain and a lot of research, I decided to try this shelf. Well, it didn't last long. At the first attempt to clean the device, everything fell on the floor. When inspecting after cleaning, it is noticeable that the holes in the supports give way to small head screws and usually fall out without much effort. The quality of the parts is really questionable and I was hoping they would last longer. Obviously…

After reading a lot of negative reviews about this thing falling off the wall I assumed it was a plumber's fault. My apologies for thinking that of so many reviewers. I'm one of those very picky do-it-yourselfers and made sure everything was properly assembled, tightened, aligned, aligned, etc. I was proud of my work. Everything looked fine too. Well, a company that manufactures and sells fasteners should be very ashamed. A few weeks later the screw that attaches a bracket to the wall just…

A solid, attractive shower shelf when installed correctly. You need a special drill bit for drilling ceramic tile, about $10. Take your time, measure very accurately, especially the top and bottom screw holes for each bracket. This will ensure the bracket is perpendicular to the floor for a level shelf. However, if that shelf gets splashed with shower water (most) you'll want the shelf to be tilted slightly away from the wall to drain the water. I installed 4 of these shelves and found that…

After reading many negative reviews of this thing falling off the wall I assumed it was an installation error. My apologies for thinking that of so many reviewers. I'm one of those very picky do-it-yourselfers and made sure everything was properly assembled, tightened, aligned, aligned, etc. I was proud of my work. Everything looked fine too. Well, a company that manufactures and sells fasteners should be very ashamed. A few weeks later the screw that attaches a bracket to the wall just slipped

Nice looking shelf when installed - otherwise I would have only given it one star. It took four times as long to install because the mounting hardware is so ridiculously cheap it took a third. - Using my own components to complete the bracket assembly with what appears to be a solid body. The plastic hollow dowels were so cheap and soft it was impossible to screw a screw in. In the end I just had to drive them into the drywall and went back to screw-in cavity wall anchors I bought at Home…

The wall anchors supplied with this shelf are made of very brittle plastic and will bend easily if attempted to mount to the hole size specified in the instructions. This means that no matter how carefully you try to align the drill holes, the screws may not go straight in after you insert the plastic anchors. I learned this the hard way. I struggled for three days to align the shelves before simply buying new wall anchors and reinstalling them. I would suggest buying stronger metal wall…