Header banner
Revain logoHome Page
enhanced magnetic 196x126mm flexible printer (7 7x5 inch) logo

Enhanced Magnetic 196X126Mm Flexible Printer (7 7X5 Inch) Review

3

·

Poor

Revainrating 2.5 out of 5  
Rating 
2.7
🖨️ 3D Printer Parts & Accessories, 🏭 Additive Manufacturing Products

View on AmazonView on ЯM

Media

(4)
img 1 attached to Enhanced Magnetic 196X126Mm Flexible Printer (7 7X5 Inch)
img 2 attached to Enhanced Magnetic 196X126Mm Flexible Printer (7 7X5 Inch)
img 3 attached to Enhanced Magnetic 196X126Mm Flexible Printer (7 7X5 Inch)
img 4 attached to Enhanced Magnetic 196X126Mm Flexible Printer (7 7X5 Inch)

Description of Enhanced Magnetic 196X126Mm Flexible Printer (7 7X5 Inch)

🌷【Applicable 3d printer model】The size of resin spring steel plate is 196X126mm. Suitable for any resin 3D printer with a printing platform size of 196X126mm, such as: Elegoo Saturn V2 resin 3D Printer. 🌷【Easy to use】The traditional DLP light curing printer platform must be removed with tools such as a scraper, while this resin flexible plate can be removed by bending.It's easier to remove the print model from the resin build surface. 🌷【Strong Adhesion】The resin steel plate surface is treated with special wire drawing, and the adsorption force is stronger, so that the model can be better adsorbed;. 🌷【High durability】elegoo saturn build plate adopts spring steel imported from USA, which has good flatness and durability; The soft magnetic stickers have strong magnetic force. 🌷【24 Months Longer Warranty】Strict testing for all components before delivery.We will provide a long-term warranty service of up to 24 months(The normal warranty period is 12 months). We will respond promptly within 12 hours in one business day. Any problem please feel free to write to us.

Reviews

Global ratings 3
  • 5
    1
  • 4
    0
  • 3
    0
  • 2
    1
  • 1
    1

Type of review

Revainrating 1 out of 5

Works very well for AM products

As expected I had to sand the surface with sandpaper as the first test print after installation as the print would not adhere to the surface. surface of the new assembly. I sanded lightly with 180 grit paper and the next test print worked great. To ensure proper adhesion of the magnet to the original build plate, I cleaned the plate with about 99% IPA, then sanded very lightly, then cleaned with IPA again, then used 4-bar clamps to hold the magnet in place for 72 seconds to keep the original…

Pros
  • Easy to use
Cons
  • Only available in white

Revainrating 5 out of 5

Didn't make it past one print.

After cleaning my Elegoo Saturn bed with alcohol. I applied the magnetic tape and let it sit on the table for 20 hours before printing with a clear red water washable resin with a bottom exposure of 25 seconds and a normal exposure of 3.25 seconds. The first print was three helmets with a height of 55 mm. Two of them got stuck, and the third, which was closer to the right side of the bed, stopped sticking after a couple of hours and fell into the bed. The bed was set up and leveled so it was…

Pros
  • Matching 3D printer model
Cons
  • thin

Revainrating 2 out of 5

Works with slight DIY modifications. No (updated)

Update: Even though the prints do finally stick, larger horizontal prints deform the build plate and pull it away from the magnet during printing. (see images with red squares highlighting the problem). This also warped the print. I don't know if this is specific to these flexplates or just this brand. You can grit your teeth and grab one of the tried and true flex sheets. Works with modification (no need to do this. The manufacturer should be aware of this issue) ), magnetism detected (no, see

Pros
  • 24 months longer warranty
Cons
  • Other interesting options are available.