🎨 3M PPS (Original Series) Paint Spray Gun Cup Lids and Liners Kit, 16000, Standard, 22 oz, 200-micron Filter, Suitable for Automotive, Furniture, and Home Use, 50 Disposable Lids and Liners, 20 Sealing Plugs Review

Cerakote Spray Rescue System. With my LPH-80 I save about 15 minutes of cleaning time every time. For the Iwate LPH-80, make sure you have the 3M PPS No. Buy 31 adapters.

I like this system. Unfortunately, this box of liners and lids had a few issues. The first 4 liners had holes in the bottom. Then they were fine, then there were more holes. 15 liners used so far, 8 of them were whole on the ground. Hope the quality control will be better next time!

Have been using this system for 18 months now. For use with Generals water-based products. I LOVE IT. Just mix color or finish and shoot. Speeds up cleaning and material that is not required can simply be closed with a lid and used later. (A little tip: turn the bag upside down when storing the closed material to keep the screen in the bag moist. This is very important!)

I bought an Iwata Baby Series LPH80 with Iwata plastic cup and 3M PPS system. It included an adapter and 1 liner along with a ring and holder. I tried the pistol once with a standard cup and then with a PPS cup. It only took one try and I was hooked. I have ordered a pack of these liners and covers for future use. These cups work great with the HVLP flow gun. Haven't tried using it upside down yet but looks like it will work fine.

I never had a problem with it until my last order! For some reason they aren't shaped properly, when I start spraying the liner pops up and makes a mess! I always make sure the lid is tight, so I figured it was me who didn't tighten it. So I poured the rest into a new set of liners, closed the lid tightly and again the liner opened when I pressed the spout. I tried making a new batch, a new set of liners and another cup to see if that was my cup. But the same problem never appeared again…

I use them with Fuji T75 / Q5 Platinum. Works great with BIN primer and latex paints and can be reused in the same job. I also stored paint in it for a month or two and then reused it with a new top filter. They are well designed and really reduce cleaning time. Despite being expensive they are amazing and I have never had a blockage with my guns using them. Another cool thing you can do is fill one of these up with a cleaning solution and just spray the gun for a few seconds if you have to…

Arrived in a 3M box and properly packaged but all earbuds are mismanufactured and leaking. Looking straight down at the lip at the top of the liner, the lip varies in width all the way around. At some point it was already, so the color will flow. The eyeliner is in the mixing cup with a snap-on lid, but this seals the color inside with a screw-on collar that presses the lid against the top edge of the carrier, which was mostly missing in my case. I also bought 16325, these were also misshaped…

I'm sure this system will work well. I bought a large set (inserts and caps) but didn't get the suction cup. I'm sure those in the paint industry weren't at a loss, but as a layperson, I didn't read the product description as deeply and thoroughly as I should have. I would recommend that 3M explain more about the requirement that this be used with a pressure cistern system, in this case a 16124 H/O pressure cistern. Also, the list of adapters isn't as comprehensive as it could be. I had to…

I use it with the Fujispray G-XP gun and model M HVLP. I have 6 oz and 28 oz systems. This rating is for 6 oz. PROs: Being able to tilt the gun in any direction and not having any leaks is great. This makes the CONS listed below only minor inconveniences. Cleaning is easier than a regular mug. No more material gets into the pressure pipe! Built-in filters are nice because you don't have to strain the material. The shelf life in disposable cups is pleasant, but later stirring in collapsible cups