🔩 O'SKOOL T-Track Hold Down Clamps: 2 Pack Kit for CNC Router, 5-1/2” L x 1-1/8” Width - Efficient & Reliable Clamp Solution Review

I finally assembled my CNC and wanted to use one of my clamps but one won't go through the handle. The other works great. I liked their size and enjoyed using them, but not dice.

I bought these clamps to use on parts that are too small for my vacuum table. I tried several other types of clamps but they didn't fit me. This style looked a lot easier to get a good clip, and of course it did. I held a 3/4" sheet of aluminum with ease. The handles could be a bit larger to make it easier to grip tightly, but they still work well.

Well done! Although aluminum is relatively light, it does not warp and holds objects very well. The included rubber/plastic feet prevent marring of wood surfaces, although it's probably worth using some scrap anyway. The plastic handles work well and have no sharp edges. Everything is of very good quality. The vibrant color is pleasing and easy to find on my often scruffy but organized workspace.

Very well constructed and strong clips. Beautiful color and finish with firm, well defined pads at each end. Use not only in the T-rail system, but also on the Worx Pegasus workbench. I bought large flat washers for the ends of the bolt and used clamps in the outside 3/4" holes on a workbench (the bolts aren't long enough for the inside holes. The knobs are also a lot better quality than others I've found and turned perfectly on the bolt. I liked the first set so much I bought the 2nd set…

I built a router slide to even out warped boards and round off sharp edges. Decided to use a T-rail and clamps to hold the parts in place. works really great, especially for warped boards. Simply clamp them in place and slide the cutter over them on the carriage with the tilting attachment. Cleans and smoothes them perfectly. O'skool seem to be the cheapest on the market and I think they are just as good quality as the more expensive ones. More importantly, they work well. The T-bolts are a bit

I bought this because of the size. Most 1/32" T-track clips are too wide for smaller tracks like Fox and Incra. The clamps didn't fit. I made a few mounts/stops to hold me in place but they work great, and the star knobs allow for less effort and better torque control when tightening.You can stow it on the top rail of the fence and use it as a handle or as a sort of hand "cue" to keep your fingers off the blade on the slide.

I have used O'skool clamps alongside similar rocker clamps. O'School is better. Read my impressions. -- WORKS GREAT!: I used O'skool clamps as clamps on a T-rail table saw carriage and it worked fantastically, holding a piece at a 45 degree angle that I could never hold with one hand . - WIDE, THICK GRIP: The O'skool's grip is wider and thicker than the rocker version. You can get better grip and more torque. - HAS PROTECTIVE TIPS: The O-Skool clamp has soft rubber protective tips on both ends…

I'm a big fan of O'skool clips. In truth, this is a type of product that is difficult to spoil. They flex a little more than the Incra. But they're also about half the price. I've never had a problem with the item I'm trying to secure shifted onto me so I'm happy. Really a star? As I understand it, something factory with a cross thread is annoying. But also a problem that can be solved for free (if you have a die kit) or for less than a dollar at the hardware store. FWIW, my two threads have no

UPDATE: 12/12/2021 Such a good deal, I bought another set! ________________ Made in Taiwan. Neatly packed in a thick transparent plastic bag, factory sealed. The clamps have a long reach, are thick and strong and are very well made and professionally finished. The vinyl protectors on the ends of the clips are large and appear to be quite thick. They have to survive the workshop use well. The handles are large with enough contoured edges for a comfortable grip and the T-bolts are long enough. As