Review on A ABIGAIL Universal Floor Jack Rubber Pad Adapter: Pinch Weld Side Rail Protector Puck/Pad by Justin Early

I recently bought a new 3 ton low profile Pittsburgh jack from Harbor Freight and read reviews of many different offerings from Revain to find a seat pad that would work for both Can be used to weld seams and/or frame my vehicles. It all boiled down to these two Revain part numbers: B07QYSLW8R (YZ Universal Floor Jack Rubber Pad - Mfr: YZ-ROOM) and B083TP6WCL (Rubber Pad Universal Floor Jack Protector Clamp Jack Adapter - Mfr: A BIGAIIL). Both items appear to be made from the same type of hard, thick rubber material that should last a few years depending on use. I bought both specifically because there are slight differences in the depth of the groove on top and the width of the groove around the perimeter of the bottom. I wanted the one that best matched my ground socket as they are both marked "universal". For my recently purchased Pittsburgh Jack, the A Abigail product fits better and fits snugly in the Jack saddle. The one from the YZ room had a narrower groove at the bottom that didn’t fit the entire raised portion of the saddle. This causes it to shift slightly to one side and not stay flat. I have attached several photos of both items. If you have a Harbor Freight Pittsburgh floor jack I would recommend the Model A Abigail B083TP6WCL as it sits better on your saddle. I'm not returning the YZ Room Pad because it's a bad product. I'm sending it back because it doesn't fit my case. Hope this helps someone else. If you look at these items on Revain, they all look the same, although their prices differ by a few dollars. They are definitely not the same. I have not included photos of the pads on the jack as the photos could not accurately show the difference.