Review on 🔧 Genius Tools 1/4" Dr. 8mm Universal Hand Socket (12-Point) - Reliable and Versatile Socket Solution (253508) by Albert Gaines

After replacing the valve cover gasket, I had trouble tightening the top two center valve cover bolts on my 2004 Dodge Grand. Front valve cover station wagon 3.3l. The reason was that the intake manifold created an angle of more than 20° on my socket extension, which made it difficult to use a torque wrench. To get it right, I had to maintain an angle of 15° or less. To achieve this I had to reduce the height of my standard 8mm 1/4" depth + universal wrench by 54mm. The Genius 8mm universal hand head fitted the bill as it is 20mm shorter than what I have used (34mm).. I didn't need the full set of gimbal heads, only 8mm, so the price for this head was perfect.It's decent quality,chrome plated but the finish isn't mirror chrome.This is too a 12 point head , although I usually choose 6 point, 12 point is actually preferable in my situation given the space constraint.The pedestal head will hold the angle you point it at and will not rotate when you point it bring to closure which at this price is sure the Genius socket is made in China (not Taiwan) but is covered by a limited lifetime warranty against manufacturer defects Angle the torque wrench on those top mounts a whopping 10°, what microphone h brings to a generally acceptable 10-11 °. I am very happy with this product and if you find yourself in a similar situation with a Chrysler minivan with a 3.3 or 3.8 liter engine it will make your life a lot easier. I hope this review is helpful to someone out there!