Review on LuckIn Standoffs Stainless Advertising Mounting by Craig Lovro

Very long screws for "thick" materials. I bought these to improve the display case to remove the plexiglass from the frame to prevent rubbing off the plexiglass. rubs on the frame. The plexiglass is ⅛" in diameter and will stand free or wobble after installation (due to the original spacer mounting screw not allowing the main screw to be flush with the spacer bracket). I ended up grinding ⅛ to ⅙ inch of each screw used for a tight fit. Thicker materials fit easily. I looked at the threads for the base of the stand (the "inner" part that attaches to the frame), they are less than about ¼ inch to allow for the stand screws to grip. They were made with a high speed cutter which causes discoloration of marble. to more than five, but it is not noticeable in the finished project. Some shavings were left inside, but they're easy to fix. Would I buy again or recommend for DIYers. Great buy, easy install, they look great. Screws, tighten screws, DONE. It comes with all accessories as described. 20 x Support Base (Main Bracket) 20 x Support Screws (Display) 40 x Vinyl Standoffs (Protector) 20 x Plasterboard/Wood/Cement Plastic Handles (Main Bracket) 20 x Plastic Handle Screws (Main Bracket)