LuckIn Standoffs Stainless Advertising Mounting Review

Almost all of them had visible defects. They aren't as perfect as pictured -- Most of the edges were crumpled, not crispy.

I love it! Nice for frameless art that can be hung on the wall. We also used it to place an acrylic sheet to protect the wall from scratches in the office chair and dining table chairs. It not only protects the wall, but also looks exquisite and modern.

I hope they keep my client's large sign - they were looking online for a better deal on their sign so we ordered it for them. They are hollow inside and feel very light compared to the original (pictured is one from a real signage company, the other from Revain).

So they don't look anything like the ones I've seen for glass plaques because they don't have a reduced diameter center going through the glass. This means that the male thread will make contact with the inner diameter of the glass hole if that is the application you chose them for. They come with two soft plastic washers for each side of the material to be mounted. I used mine to mount the guitar cases to the walls with a very neat, secure mount. The back of my displays is 0.5" plywood, so I…

Very long screws for "thick" materials. I bought these to improve the display case to remove the plexiglass from the frame to prevent rubbing off the plexiglass. rubs on the frame. The plexiglass is ⅛" in diameter and will stand free or wobble after installation (due to the original spacer mounting screw not allowing the main screw to be flush with the spacer bracket). I ended up grinding ⅛ to ⅙ inch of each screw used for a tight fit. Thicker materials fit easily. I looked at the threads for…