Review on Sydien Thread Push Pull Pushbutton Vehicle by Tommie Lawson

bulbs or other bulbs. There are three switches in the package. There are no instructions but it is very easy to do. Each switch has a black button that you have to pull to turn on and push to turn off. Handle and lock The nut is unscrewed to allow the switch shaft to be inserted into the hole. Then screw in the lock nut and black handle. Each switch has two poles for connecting wires. Connect the positive 12V DC wire (often red ) to one of the poles by loosening the screw and inserting the stripped wire into the hole, and then tightening the screw. Insert the positive wire from the lamp (or other load) into the other pole. Remember, that the LED lights only light up when there is a St rom failure. There is no flow in one direction. If the plus is not marked and the LED is not It or Reverse are the wires coming from the switch or the reverse light.