Review on 🔧 SPACECARE Workbench Casters Kit - 900lbs, Set of 4 Heavy Duty Side-Mounted Retractable Casters, All-Steel Construction with Urethane Wheels, Includes Bonus Install Template - 4 Pack by Timothy Weems

I have a 3-in-1 router that I've always found difficult to move due to the 800lb weight. When I found these casters for the workbench, I really felt like my problem was solved. My first problem was changing the lever so I could lift both reels at the same time. To do this, a piece of 1/4" flat bar was attached to two sinks with casters so they both click into place at the same time, on either end of the bench. This solved the problem of tipping the bank in one go. Angle that causes the machine to tip over. The flat bar solved this problem and the machine was easy to lift and move for the first 2 or 3 strokes. The casters that came with the levers suck. The way they are designed, when the roller spins, the ball bearings come out of the roller and cause difficulty moving or turning the machine. If my car were a little lighter, these problems might not occur, so be yourself aware that this is not the case with the rollers the best Since then I have been ordering dual bearing low profile rollers which should solve my problems.