Review on Makita DTW1001Z battery impact wrench, no battery by Mateusz Wycech ᠌

I bought a "carcass". Then I bought a set of original 18V batteries 5a \ h those with charging indicators in the battery itself. The other day they unscrewed with the help of it and the impact head at 36mm. 3/4" square nut on front beam of the cargo vehicle "MA3". So there, all the carvings on the stepladder itself were covered in dirt, rust, in some places it was somehow "clogged" i. E. there were no turns themselves from driving on bad roads. In some places they worked where the front beam "rowed" along this track and all sorts of stones came across there and they just spoiled the thread on the stepladder because the thread was longer than the nut itself ! As a result, to unscrew these very complex nuts 8pcs. without cleaning it from dirt with a metal brush and without chasing it with a lerka, it took only about five, FIVE minutes))))) and 1 full battery, which was discharged from 4 divisions of the charging scale on the indicator that stands on the battery itself up to 1 division. The noise (the blows themselves) during his work were really unbearable! Sometimes it was even deafening. In the ears then "the ringing is worth it." Need to in sl. put on headphones. You also need to hold it strongly with both hands, because with such complex fasteners it strives to jump out of your hands, but this is not a drawback, but a feature of working at the very maximum power. He unscrewed everything without using any 2-meter pipes as a lever and the help of a 2nd person and physical strength and time of about a couple of hours. It doesn't matter if it breaks, spare parts for it is available from authorized dealers.