Review on MakerHawk 3Pcs DC-DC Adjustable Buck Converter 6V-32V(12 24V) Power Buck Module To QC3 by Zack Higgins

I've used several of these in various projects and portable power supplies and they work great and charge very quickly. Keep in mind that if you don't use a heavy-duty charging cable, it may not charge very quickly, or if you don't supply enough power to the module. In my experience they work fine at 12 volts, but they work even better at 20 or 24 volts if you have a good 5 amp RMS power supply behind them. But you have to try the different cables you have and plug a booster probe into the input, and you might be surprised at how different the speed your device will charge with a quality cable compared to a regular cable. The only negative I can point out is that the blue LED is absolutely insanely bright and I really want someone to tell me why they use these LEDs on the boards because for example if you have the board open and aim at the ceiling, you The whole room will have a blue ceiling at night. A simple fix is to stick a piece of black tape over the LED, which will reduce and block the brightness to an acceptable level.