Review on Trimmer petrol Huter GGT-1500S, 2.01 hp, 46 cm by Micha Dobrzyski ᠌

When you buy this rattle, the first thing you do is throw away the spool of line. She doesn't work at all. Tall grass wraps around it and climbs almost into the bearing. But the knife is my respect! At maximum speed (and you can only mow with this scythe at maximum speed), it cuts not only thick sticks, but even an aluminum profile! I advise you to use gasoline only 95th and higher. On the 92nd, on a cold trimmer, the Huter GGT-1500S starts up so badly that you have to remove the air filter and open the damper. It turned out to be a disgusting air filter . Oil is only recommended semi-synthetic for two-stroke Huter. The candle in the kit turned out to have a damaged insulator . However, it works. True, I had to set the gap myself . The rod connector has poor fixation, it loosens during operation (vibration), the spring-loaded pin was immediately lost. I had to replace it with a bolt and nut. Vibration, by the way, is decent, after three hours you don’t feel your hands. The noise is also strong, you need to work with headphones. And how happy the neighbors will be. An unloading vest is required, I bought it separately (only comes with index X). The Chinese saved even on a belt for a vest! He always jumps out of the bracket, lacking some twenty centimeters! A year later, the plastic lock of the vest was unbent, and it had to be wrapped with tape! Just like the belt! From the container for mixing gasoline and oil, the mixture cannot be poured into the tank without spilling half of it on the ground. The overall manufacturing quality of the lawn mower is disposable. It will work for three years, and then if you please, go to the store for a new one. The oil injection hole on the gearbox housing is deliberately made so small that only a syringe needle will fit in there. : the cold start problem was solved by replacing the air filter with a filter from another model