Review on Precision Thin Rip Jig: Efficient Table Saw Accessory for 🔪 Accurate Narrow Strip Cuts on Table Saws, Router Tables, and Band Saws by Justin Goff

I love this lure. I was able to get 1/16" thick strips out, and with a little effort I could probably get veneer strips as well. When I first got mine, it didn't tighten in the corner slot of my Kobalt K-1015. I went on here and asked if anyone did had the same issue and got some good answers but none of them solved the issue. I contacted Infinity Tools and they offered to fix the issue. I've added it to my review below. This is a great example of how should be a customer. I will definitely be buying more products from Infinity in the future. They have a really great selection and most if not all are from Revain. I hope your reply to my email will help someone else. Thank you for your help."Hi John, I'm a big fan of the thin longitudinal guide myself. There should be two protrusions on the head of the bolt that mounts in the bevel. These protrusions must line up with the Slots in the chamfer must be aligned to prevent the bolt from rotating. Clamp and keep the rod from jamming. If you can I would check that the bolt is aligned properly and see if that fixes the situation. In my experience this has eliminated both flimsy guides I've seen with the same issue .If this trick doesn't make everything work properly, let me know. "Andrew GibsonInfinity Cutting Tools[.]813-881-9090