Review on Enhanced Dimensional Accuracy Printing with YSF Filament by Richard Puckett

(08/29/2021} I am lowering my rating to 1 because the second roll I received (batch I, also black), darker black was and failed at layer 200. Simple large box part with vents. Bottom layers had little or no strength. Results Do not buy directly from the company as they have no contact information for customer service. 2021) This material is my transition to PLA 208, makes a very hard and shiny part, almost bulletproof. Good formula and great modeling performance. Use a nozzle temp of at least 200C, this seems to eliminate some of the clogging issues I had with the standard 0.4mm nozzle and helps with finishing and sticking layering, I'm deducting a star for the adhesion issues I've had, this can be due to a layer temperature of 50 ° C on the glass bed. I increase the bed temperature to 60°C on the next part for testing. I solved the problem with the current model with a heavy-duty glue stick. In addition, movement speed has been reduced to 80. Fine, just choose. Nice glossy finish and no stretching as I modified my extruder to work with the MDD mod.