Review on High-Quality Pack of 5 M12-1.50 Single Oversize Oil Drain Plugs with Gasket - Reliable and Durable Solutions by Tyler Munajj

This larger plug has worked like a charm so far. On my bike, the oil has to be drained from the side stand. I did this on a jack in the middle to leave some oil for flushing.1. Apply grease to the threads of the bolts 2. Start the bolt and turn it one full turn3. 4. Wipe off old grease with metal shavings5. Apply fresh grease again6. Retighten the screw and tighten another full turn from where you stopped7. Repeat steps 3-6 until the screw is almost fully seated. Remember that you will need to add a sealing washer. So leave a space of 1-2mm for it. Then I completely removed the screw. Then I added a sealing washer and carefully screwed the screw in until it bottomed out. Place the bike on the side stand and drain the remaining oil and collect the remaining chips with the bike in the drip pan. Tightened again. Don't overtighten! Now add oil up to the recommended level.