The case is good enough and mostly does the job for the components it was made for. A few things could be better: 1. As mentioned in another post, you don't have access to the Pi's micro SD card slot unless you take it apart again or cut the slot into the case itself. 2. As in the previous case, the USB power connector is closed on the screen. So if you want to power both, by powering the display and then using a standard USB to Micro USB to power the Pi, you can't do that without some kind of hole/slot to cut into the case. It's weird to hide things like that. You can power the display from the Pi, but it uses some GPIO pins, which in turn prevents you from connecting a GPIO ribbon cable. Alternatively, you can use a micro USB hub or two power adapters.3. The case is quite tight with the ribbon cable to the DSI connector (display side). That's not a problem, but a little more space would have been desirable, otherwise a ribbon cable with a 90-degree connector could have been included.
GeeekPi Raspberry Pi Cluster Case with Cooling Fan and Heatsink for Pi 4 Model B, 3 Model B+ & 3/2 Model B
11 Review
🎁 Ultimate BBC Micro bit Sensor Starter Kit: Keyestudio 37-in-1 Box with Tutorial, Compatible with V1.5 & V2, Gift for Kids and Adults (Microbit Board Not Included)
11 Review
🌐 MCIGICM 2 Channel DC 5V Relay Module: Optocoupler Low Level Trigger Expansion Board for Arduino UNO R3, DSP, ARM, PIC, AVR, STM32, Raspberry Pi
11 Review
REXQualis Comprehensive Starter Kit with Arduino MEGA 2560 & Detailed Tutorial for Arduino IDE Compatibility
11 Review
uxcell 3.5" HDD Screw Black 200pcs for Computer PC Case - Flat Phillips Head - 6#-32 - Hard Drive Fasteners
10 Review
M.2 Screw Kit: Easy Mounting for NVMe SSDs on ASUS Motherboards
19 Review
MacBook Retina 13-inch (A1425, A1502) and 🔩 15-inch (A1398) Bottom Case Screw Set with Pentalobe Screwdriver
11 Review
36-Pack Black Rubber PC CPU/Case Fan Screws/Rivets Set for Computer
11 Review