Review on 🔧 Lincoln 3601 Pressurized Air-Operated 18 Gallon Portable Industrial Fluid Drain Tank with Adjustable Funnel Height, Fluid Level Indicator, and 14 Inch Bowl by Josh Jeffries

so far so good. Like, like, something like. The wheels are already mounted in the case, thank you. The rods are easy to insert. But when I wanted to swap out the black plastic female hex connector for a brass female connector, I didn't have a large external hex to unscrew the connector. Hitting the rim counter-clockwise with a screwdriver and hammer only chipped the rim of the black connector. So I took a 17/64 left hand drill and drilled through the center of the black connector hoping the torque would unscrew it. nope Then I took the extractor for the left screw, slowly opened the drill and inserted the extractor into the dowel. Turned off the drill and blocked it, then used an offset screwdriver to unscrew the black connector. I wrapped the tape correctly around the brass tube and finally assembled the system. Water pipe and faucet work. We don't use this for butter. We have through the wall air conditioning in our shed that sprays water and dirt all over the car and onto the wall. The air conditioning technicians have just drilled a hole in the bottom of the air conditioning system, are now standing next to the car under the hole, rolling it to the edge of the carport and opening the drain pipe if necessary. He has to work. That should work. Fingers crossed it works.