Review on Beige EPAX Resin Printers for High-Quality Printing by Chris Castro

I don't want to write this review because I want to keep this amazing resin a secret but I know how hard it is to find a good resin. has been used before. It is also the thinnest resin and the strongest. The pictures don't do it justice. I dropped a few pieces on a brick like in the video I posted, I dropped a mini 5 times and I didn't have any breaks. If you want to print any mini, use this material. I used an Elegoo which looks like a press but wasn't very strong and didn't give nearly as good detail. Advantages over the competition: Slim Doesn't separate easily 10/10 for details Feels like real plastic! Even make a nice wood/plastic block noise when colliding with other parts. There is no noticeable difference between curing in water and curing out of water. Therefore, it is not necessary to polymerize in water. Very durable. I print in one color. SettingsLittle SlicerBottom Layer: 6Bottom Exposure: 22sNormal Layers Exposure (at 0.05mm) 2.5sLight Off 1sPower 80%Heave 6mmRise Rate 0.07mm/sec Down Rate 3mm/sec Supports 0.20mm peaks at normal density Note: fine-tune the bottom layers. Overexpose and the material becomes very difficult to remove from the build plate and breaks the underlying layers causing pieces to be thrown off. Printable parts will be found lol