Review on Ad Tech Mini Hi Temp Combo White by Jennifer Campbell

I have accumulated a lot of things in my house that need to be repaired. I learned from a friend that I can fix most of these accumulated breakdowns with a HOT MELT GLUE GUN. Luckily for me, my friend gave me this glue gun to use and I decided to share with you my impressions of working with it. In appearance, it looks like some kind of toy gun, and when I first saw it, to be honest, I doubted that it would cope with my tasks. However, as they say, appearances are sometimes deceiving. This glue gun is powered by electricity. As for me, this is the best option, since batteries are generally an unreliable thing, which you always need to have in stock, but pistols that run on removable batteries are often discharged at the start of work ... To start working, you need to turn on the gun itself ( switch to ON) and wait for the gun to heat up so that it can melt the glue sticks. At first I thought that it heats up quickly enough, since the principle of operation resembles a soldering iron, but I had to wait about 5 minutes before normal heating. When the pistol was ready to go, its upper part got quite hot, and since I didn’t know this, I grabbed it and a little life flashed before my eyes :) Before the work itself, do not forget to insert the glue stick into the gun. To do this, the gun has a hole where it is inserted all the way. After that, the gun is completely ready for work. After everything is ready for work, we press the "trigger" of the gun and due to this, the glue stick begins to push towards the hot place and it begins to melt. The melted adhesive is released from a special nozzle, which is released in the form of a strip, in fact, the diameter of which can be controlled. Depending on the pressure, a certain amount of glue is released (respectively, the harder you press, the more glue is released). Personally, my headphones cracked and a little more and they would simply fall apart into two parts. However, having applied glue to the crack with a pistol and fixed it for a while in the state in which it is necessary for them to connect, the headphones returned almost to their original state. Of course, the seam of glue that was applied by me is clearly visible in them, but I use them again at home and get the same pleasure. When working, there are times when the gun needs to be temporarily put aside and in order not to spoil anything, it has a special deferred stand that keeps the gun in a state that is safe for surrounding things. As a result of using the HOT MELT GLUE GUN glue gun, we can distinguish a number of advantages and disadvantages that this gun has. I ask you not to take the shortcomings to heart, as these are the topics that I would optimize chtol in this pistol, but in general I liked working with this pistol. Advantages: - not expensive - work from the electric power; - convenient work; - high-quality result; - support for breaks between work. Flaws: - warming up the device for about 5 minutes (I would like it faster); - the upper part of the gun heats up quite strongly; - the glue hardens for a relatively long time (if they need to seal a crack like me, then this is not a problem, however, if you need to glue an object that has fallen into two parts, then you need to fix this object in the position in which you want it to stick together and if you hold with his own hand, then his hands may start to hurt). If the gun is no longer needed, and you have completely finished the work, then you must immediately disconnect the glue gun from the power supply. Even if you know that during operation, the gun will not be used for a long time, you must always turn it off. The fact is that if you do not use it, the glue stick is still in direct contact with the hot zone, which means it still melts. As a result, if the glue is not squeezed out of the gun, after a while it may leak from other places and, at best, simply spoil the surface on which it stands. In the worst case, you may not replace it and come into contact with hot glue (burns are guaranteed). Do not forget that after each use of this gun, the nozzle must be cleaned of the glue frozen in it, since I forgot to do this and therefore the glue was initially very tight, but then the dried glue melted and began to come out easier (but still do not forget to clean costs). In general, I am satisfied with the result of working with this glue gun and recommend it to everyone. For the price this is a great option. I especially recommend it to people who like to work on the product of various applications. Buy and you won't regret it!