Review on 🚗 Yueton 12pcs LED Rocker Toggle Switch On-Off Control for Cars and Trucks - Blue, Green, Yellow, Red by Micheal Esquivel

These buttons are good for the price but as other reviewers have pointed out the switches are upside down. Looking at the switch from the side, there is a copper colored contact (negative) on the top of the switch (see last photo). As you can see in the 1st and 2nd photos the switches come like this. The LED is down. Most people want the LED on top as that makes more sense. As you can see in Photo 3, just take a small screwdriver and stick it in the side and the cover will pop out with a little persuasion. Pay attention to the 4th photo as there is a small metal lever under the switch. It can fall out easily, please note it is one way only. The same applies to the white part under the switch panel. It only goes in one direction. Remove the switch bezel from the white part, rotate it 180 degrees, put it back on the white part and put it back into the switch. Then it lights up correctly, as can be seen in the 6th and 7th photos. Easy if you do the first. I used yellow as that would be my least used color if I messed up, but again it was easy as long as you are careful not to turn the pieces inside out. Here, too, everything remains the same on the inside, you simply turn the "switch face". Hope that helps! Please give me a like and a comment if it helped you. Thanks