Review on Worksite 20V Cordless Impact Wrench: Fast Charging, 8-Piece Socket Set, And Tool Bag For Easy Storage by Douglas Jakab

No room for a big air compressor in my garage. Settled for a pancake compressor as it fits.Using an impact wrench is not possible with that setup. Renting equipment takes additional time and money.Needing to rotate tires etc. Would require the tire iron for the lug nuts.Want to make things a little easier.Found this 1/2" WORKSITE cordless impact wrench.Includes:carry bag, impact driver, battery, belt clip, 4 sockets, extension, charger, manualAfter unboxing, charge up the battery with the charger.Seat the battery firmly into the charger.Plug charger into an outlet.After a few hours the blinking LED will remain lit.Unplug and install battery onto the impact wrench.The battery charger chord length from plug to base is 6'On the back of the charger base are two hangers built in, if you wish to wall mount.Look closely on the back above the holes. (46mm= 1 3/4") spacing between the two mounting holes.The charger is made well and has good venting all around. The LED will turn red if over heated!The 20V Li-Ion battery weights around 1 lb and 5.8 ounces. Has a built in battery level indicator. Just press the red battery button.Remove the battery from the impact wrench by pressing the yellow button and then sliding the battery away from the impact wrench.The 4 included sockets are: 15/16, 13/16, 3/4, 11/16.Difficult to read the socket sizes. Wipe with rubbing alcohol, let air dry. Apply a bright crayon. Wipe off. (see photos)The extension bar is 5" long and has laser etched lettering. Much easier to read than the dark sockets.After dropping the 13/16 a few times on the driveway, did end up with a few scratches.Inside the socket the black is also removed.Installing the metal belt hook only takes a few seconds. Screw is also provided.You may mount on either side of the drill. Nice.This hook holds the wrench onto a belt with no issues.The impact wrench with battery is a little over 4 lbs.The impact wrench has rubber grips and fits good in the hand.Easy to use forward and reverse switch. Switch between thumb and index fingers. Middle position is lock.With each press of the trigger, a LED light right above the battery will light up the area in front of the impact wrench.Tool BagHas a plastic zipper along the top and a carry handle that attaches to the front and back top side.Front and back have a hard shell center. Sides top and bottom are lightly padded.Good sewing all around the tool bag.Everything that's included will fit inside the tool bag when zipped up.Using the impact wrench with lug nuts etc was a breeze.This can be used for weekend projects or even tossed in the trunk for emergency's.Good amount of power and works with other 1/2" impact sockets etc.This tool will save money and time, good investment at this price.Now I'm free of cords and air lines.Hope this was helpful.