Review on 📐 Knape Vogt 8405P-10 10-Inch by Mike Larkin

I love how smooth they are. The traction is moderate. They close well. A few of them had more friction due to the body side portion of the rail slightly pinching the center rail. I measured the gap, it was about 0.010 inch smaller than the plain ones, so I carefully folded it wider. This solved the friction problem. I followed the online instructions carefully. It is important that the drawer is exactly 1" to 1-1/16" smaller than the opening or it will not work. I use precisely measured blocks as measuring instruments. I used a laser level and spirit level. I used rear KV sockets with spikes. The drawer should be 1/16 inch square and the slides should be parallel and aligned with the drawer and in the cabinet. All 6 drawers worked first time, with minor adjustments to one drawer due to an uneven soft close, which was fixed because the back of the slides were too far apart. They are made in the USA which is a huge plus and too rare these days. It took me about 30 minutes to install each pair of slides.