Review on Western Digital Purple Surveillance Internal Computer Components for Internal Components by Mateusz Drabarczyk ᠌

And so the device worked 23 days 24/7. The HDD is installed in the home NAS, yes it is in the NAS, and not in the video recorder / server. Fed up with marketers. During this time, the hdd was completely overwritten a couple of times, in "smart" it's clean, no overwritten sectors and other troubles, the average temperature is 33-35 degrees. But there is one BUT, the device has a vibration that is not comparable with others installed in the NAS hdd, at first I sinned on the case cooler, but after removing the cover and turning it off, with a stupid finger, I found the hero of the occasion by touch. I had to slightly loosen the tightening of the dampers so that vibration was not transmitted to the body. I don’t know how long a device with such vibration will work, I hope I’m lucky and will work for a long time. KMK in the neighboring "shinmontazhke" disks balance better than the WD! P. SMART Data for Disk : t10. ATA___WDC_WD84PURZ2D85B2YY0__XXXXXXXX Parameter Value Threshold Worst - Health Status OK N/A N/A Media Wearout Indicator N/A N/A N/A Write Error Count 0 0 N/A Read Error Count 0 51 N/A Power-on Hours 196 0 N/A Power Cycle Count 7 0 N/A Reallocated Sector Count 0 140 N/A Raw Read Error Rate 0 51 N/A Drive Temperature 330 N/A Driver Rated Max Temperature N/A N/A N/A Write Sectors TOT Count N/A N/A N/A Read Sectors TOT Count N/A N/A N/A Initial Bad Block Count N/A N/A N/A -