Review on Reprapper 201 Advanced UV Curing Solution by Aaron Bannister

The mini pictured was printed with a 2s layer exposure but I printed with this resin with an exposure of only 1.2s, at 1.2 it has a higher print quality, you must have PTFE apply on the FEP layer with exposure 1.2s, at the time of purchase it was really cheap $12 now it's more expensive and now there are better options at $17 for 500g in terms of print quality. The smell is not that strong. If it gets on your skin, wash it off immediately, this resin is quick to irritate the skin. Color pearly white or white sand. The highlight, however, is the aluminum bottle, which closes very well and holds back the resin. Be sure to use the inner cap. I have printed in both Anycubic Photon Mono and Kingroon kp6 mono with this resin. The miniature print should be done with an exposure time of 2 seconds and a higher print speed of 1.2 seconds at higher resolution using PTFE in combination with a lubricant and FEP. Cuando la compre estaba bien barata $12 500g al precio que se encuentra en este momento hay posiblemente mejores opciones. No tiene un olor tan fuerte, perosi es irritante a la play, no olvidar usar mascara o guantes. El color is un blanco perlado o el de arena blanca. This can be an issue in the manufacture of Photon Mono and Kingroon KP6 Mono.