Review on Hopider CNC Wide Foot Pegs 360° Rotating MX Chopper Bobber 🏍️ Style for Harley Dyna Sportster Fatboy Iron 883, Gold - Enhanced SEO by Jeremy Hudson

Compared to what you would pay for roughly the same looks and functionality ($80-$180), this is a great purchase, even with minor adjustments/fixes/implementations. First impressions were great, light but solid and seemingly good build quality. I feel the need to secure the threads with every screw possible, so I decided to unscrew all the "teeth". The teeth fit a #2 metric allen wrench. After removing the first pair it was obvious that the manufacturer had already applied some sort of thread sealant, nothing major but my rework with Loc-Tite was probably unnecessary. To check how he held his position I removed the loop/twist. Screw (metric hex wrench #6). unprepared for two metal balls to fall down and roll away. Be sure to only open the hinge/spin straight up or down to ensure you don't drop or lose the balls holding the spin/angle. -Davidson Sportster Roadster - another pulled in with no problems. Using a dremel, I slowly carved a hole for the pin (maybe it was a wobbly deformed pin from my bike). So use caution, you may need to drill or grind some extra space in one or both of your new footpegs. Overall, absolutely worth the money so far, even if the pin doesn't fit. Some adjustments and additional work were simply made on my part. I didn't have to adjust my derailleur spline for toe shift, your mileage may vary depending on your shoe and current derailleur position. A quick test ride and I'm very happy with the extra grip my feet now have. (Only downside is I now realize how slippery my brake pedal is!). If the quality or usage changes from good to bad I will update this review again. Thanks for reading and good luck in choosing which footrest you need to hit - this one is totally worth it so far. /Warning: Be careful, the left footpeg runs the risk of damaging or colliding with the derby's lid. It's ok as the footpeg is usually down, but if your bike falls it could result in the cover being scratched or simply punctured. This is with the standard center control pin mount. Can't speak to any aftermarket, if they are further away it may not be touching or irrelevant.