20 Sheets Printable Vinyl Sticker Paper For Inkjet & Laser Printer - 8.5" X 11"" Matte Finish Cricut Compatible Review

I purchased two packages of this vinyl but it's much too thin. It curled into a tube almost immediately after removing from the package. I tried to straighten it out and air got between the backing and the vinyl. I had to unpeel it to get the air out. I was able to flatten it and print a page but when it came out of the printer, once again, it had air between the vinyl and the backing paper which affected my image. I returned this immediately.

I used the paper to test some sticker designs, and it printed really well! The only issues I might have is that the paper doesn't like anything else in the printer tray, it pulled the papers under it through the printer the first time. It also stains a little bit if you spill, I placed some stickers on a water bottle with flavored water, and it leaked and stain the sticker. These are relatively minor though, and I really liked the paper outside of these two complaints!

First off, this paper is awesome. for about 70 cents a page, you can't beat this paper. It prints wonderfully. Laminate it with some PVC laminate and you got some really nice looking stickers on your hands! It's now my new favorite paper to use for my stickers.HOWEVER, the one little drawback is that the sticker backing is super thin, and the sticker paper doesn't stick great to it. It's a good thing that your stickers are easy to peel off the backing when your ready to slap your sticker on…

It curled, ink smeared, parts of it didn't even hold ink. By far the worst vinyl I've ever used. Returning and will not be buying again.

Vinyl rolled and crinkled coming out of the printer. The vinyl itself is very thin. As I was cutting it it rolled up and also the sticker crinkled and created grooves in the print after I cut a section of the paper. Also a chunk of the printed ink scratched off of the print after.

Overall this vinyl is decent. Colors are great, ink dries quickly and vibrant and sticker adhesion is pretty good. I gave it 4 stars for the backing paper. Its super thin and tough to work with. I cut stickers with a Cameo 3 and just trying to peel the sticker sheet off my cutting mat results in the backing ripping and it ruining the sticker as a result. Its also easy to release and can shift on its own when peeling the stickers up off the mat. Water resistance is good in that the vinyl doesn't

These are great for printing on. I used them to put in a cup and a tumbler. Just make sure you give it a few minutes to try before picking up.

After a few weeks I am surprised to say the ink holds AMAZING. It doesn't fade like cheaper crap paper. Cover this with some clear paper and you got your own decals.

Right out the package the papers curled up and jammed my printer. The paper is thin, and the backing barely sticks to itself after the image is cut out. Leaving it useless for home - based sticker businesses. After testing the water resistance, I was so disappointed. Upon drying the image curled up and removed from the sticky part.

Paper so far is nice idk about the water resistance as I didn’t put it in anything that was going to get wet. These aren’t sheer they are matte white and did print nicely.

This glossy sticker paper does not work well with cricut, however the company is awesome. I put a review up stating the vinyl didnt work and they took it upon themselves to refund my money and send me the matte vinyl they make. Which does work with cricut.

This paper is 11.65 x 8.4 - which means it doesn't print straight. my printer pulled it in crooked every time which means it doesn't like up with cutting machine lines. Its very glossy and thick. Not a favorite

This worked very well. I was also expecting to be able to remove the decal after the holidays to replace them. Alas, I misunderstood. They seem quite permanent. By they did work well.

While the material itself is good, the packaging and shipping process ruined the sheets. The corner is crinkled and increases the risk of jams.Edit: I give customer service a 5/5. They voluntarily issued a refund and replaced the product. The new package came in undamaged. The stickers are holding up well. I would note the designs are water resistant but do need a second protective layer to really be waterproof.

Now that I’ve tried vinyl paper I probably won’t go back to regular old matte paper. This was exactly what I wanted. That's my feedback.

Most sticker paper doesn’t not print well with my HP Officejet 9010 but this does! No smearing! Stick well and is water proof up to 30 mins tested. Will buy again!

i bought this because i have a cooking event on friday and i wanted to print label stickers and this paper is so good , even tho it’s not already cut it’s still great and you just gotta cut it out yourself

I used this product to replace waterslide decal paper on tumblers. This was so much easier and the color was beautiful. Thanks for attention.

This paper took well to the ink. To be cautious, I allowed the print to dry for at least 24 hours before I attempted to do anything with it. I wasn't sure what to expect, since it was my first time using this product. It can be peeled off, easily, which I'm not sure (yet) if that's a good or bad thing.

These sticker papers are great. My HP envy printer and these sticker papers create a high quality sticker. I do have to go to print settings and select "best print quality” and for the paper setting I put glossy paper. But those are now my default settings and I always get the same quality results. If you have a lower end printer you’ll probably have issues just FYI. I personally tried using my older printer that I had and it did not come out well.I also have no problems with the paper in my…