🎨 Scotchgard Bra Paint Protection Film Roll - 3 Inches by 60 Inches - Bulk Size Review

That was a bad buy. The product was clearly cut from a larger roll. Which left a lot of paper around the edges and jagged edges. Thin at the edge, not square. I wasted a lot trying to fix the problem. Wouldn't recommend it.

No fancy kit needed, measure, prepare and follow a few basic instructions and you'll have decent protection for your rocker panels, bumper rocker panels. Should be used at temperatures above 70 or indoors. Mine took a day or two to fully cure and get rid of the blisters.

Very good product. The only issue I had with the product I received was that the manufacturer's edge was a bit rough. The edges were rough while the edges I trimmed with a razor were clean and fitted well. I had to do a lot of rubbing to release the manufacturer. I would recommend that the manufacturer check the cutting blade more often for a clean edge.

I glued this 3 inch strip to the top of the tailgate between the handle and the tailgate, perfect width, just had to trim the ends to make it 58 inches long. EASY INSTALLATION: Fill a spray bottle with water and 3-4 drops of Dawn Dishwashing Liquid and wipe up and down to remove the solution. There were a few small blisters which disappeared after about a week. It's almost imperceptible. I later cleaned the truck and rubbed the tape down with a microfiber cloth and there are long scratches that