🔴 APIELE Rocker Toggle Switch DC 12V 20A ON-Off with Dot Light SPST 3 Pins 2 Position 8 Pack KCD2-102N (Red) Review

Nice little switch for automotive applications. I used it to drive the fuel pump. The LED display provides a positive indication of the power applied.

This was a nice set of pre-assembled rocker switches. There are 10 of these in the kit which is also good as it has plenty of spares for future projects. Installation is easy, as you'd expect given the two wires here. Once it's set up and powered on, the LED indicator will light up to let you know it's powered on. I would recommend them - they are cute little switches with a nice clicking feel.

Works, feels great and looks great. Make no mistake if you need more than two of these. The blue dot is bright enough to be seen during use but not that distracting. The only thing to watch out for are these, and most other non-US made switches are less than 3/4 inch in diameter. If you use a 3/4 inch drill bit they will be loose. Drill a 5/8 inch hole and file the hole to an exact fit.

Excellent switch replacement for your typical vehicle wiring harness. I liked the derailleur my suspension came with, but I placed it on the dash. This illuminated the mirror and I couldn't see anything at night. They're thin, but you can easily tell when they're in the on position. The buttons come with a cable, but you can remove the cables and plug in your own pre-made connections. A really great kit with a few different colors to match your dash or instrument lights.

These are good quality rocker switches with an LED indicator when it is on. They are easy to install and work well. I like the pigtails installed on each switch. To test, I installed one of these in a piece of 3/8" plywood and connected it to an LED flashlight. As you can see from the photos, it worked as it should. I gave it four stars out of a five star -Rating given because they arrived with no schematic, mounting hole instructions or size, you need to understand that yourself, if you can…

They work, turning on and off is firmly felt. Make no mistake if you need more than two of these. The blue dot is bright enough to be seen during use but not that distracting. The only thing to watch out for are these, and most other non-US made switches are less than 3/4 inch in diameter. If you use a 3/4 inch drill bit they will be loose. Drill a 5/8 inch hole and file the hole to an exact fit.

Great switch to replace your typical vehicle wiring harness. I liked the derailleur that comes with it my suspension was delivered but i placed it on the dashboard this lit up the mirror and i couldn't see anything at night they are thin but you can easily tell if they are in the on position the buttons come with a Cables supplied but you can also remove the cables and plug in your own pre made connections A really great kit with a couple of different colors to match your dash or instrument…

These are good quality rocker switches that glow with LEDs when on. They are easy to install and work well. I like the pigtails installed on each switch. To test, I installed one of these in a piece of 3/8" plywood and connected it to an LED flashlight. As you can see from the photos, it worked as it should. I gave it four stars out of a five star -Rating given because they arrived with no schematic, mounting hole instructions or size, you need to understand that yourself, if you can get over…