Header banner
Revain logoHome Page
high-quality assembled metal extruder hotend for additive manufacturing process – top printers & products logo

High-Quality Assembled Metal Extruder Hotend for Additive Manufacturing Process – Top Printers & Products Review

4

·

Average

Revainrating 3.5 out of 5  
Rating 
3.4
🖨️ 3D Printer Parts & Accessories, 🏭 Additive Manufacturing Products

View on AmazonView on ЯM

Media

(4)
img 1 attached to High-Quality Assembled Metal Extruder Hotend for Additive Manufacturing Process – Top Printers & Products
img 2 attached to High-Quality Assembled Metal Extruder Hotend for Additive Manufacturing Process – Top Printers & Products
img 3 attached to High-Quality Assembled Metal Extruder Hotend for Additive Manufacturing Process – Top Printers & Products
img 4 attached to High-Quality Assembled Metal Extruder Hotend for Additive Manufacturing Process – Top Printers & Products

Photos by authors

(2)
img 5 attached to High-Quality Assembled Metal Extruder Hotend for Additive Manufacturing Process – Top Printers & Products
img 6 attached to High-Quality Assembled Metal Extruder Hotend for Additive Manufacturing Process – Top Printers & Products

Description of High-Quality Assembled Metal Extruder Hotend for Additive Manufacturing Process – Top Printers & Products

The metal hotend kit suitable for almost series of Creality Ender and CR printers. The hotend is pre-assembled for easy installation. HIGH PRECISION: Cooling system with high quality and the frosting surface of aluminum shell anodized for more sturdy and wearable; integrated structure are convenient for disassembly, repair and assembly. Rigorous Process: FEMBW Metal hotend strictly follows making standard, greatly reduce the risk of clogging and uneven extrusion, delivers you consistent output. So you from replacing the PTFE tube frequently, requiring less maintenance. The metal hotend kit can withstand higher temperatures, After replacement you’re free to print filament that has high temperature requirement, such as ABS, Nylon, and Polycarbonate etc. Our Hotend kit does not contain heating elements, but we reserve installation locations for the heating elements, so you can configure heating elements with different powers according to your personal situation.

Reviews

Global ratings 4
  • 5
    1
  • 4
    0
  • 3
    2
  • 2
    0
  • 1
    1

Type of review

Revainrating 5 out of 5

The best purchase in my life, I will definitely buy it again.

Be sure to make sure that all elements fit snugly together and are not too loose / tight. Check that the plastic feed tube is fully inserted into the hot end and is firmly fixed. I bought this hot end twice, because. for the first time somewhere messed up during assembly. As a result, there was a jam inside, the feed mechanism began to slip, the print became of very poor quality. The plastic began to slowly but leak through the threaded connections and flooded the hot end from the outside. It…

Pros
  • The hotend is similar to the one that comes with the printer. In addition to it, the kit includes a tube for supplying plastic, a thermocouple, a heating element.
Cons
  • I did not have insulation in the package, which is stretched over the hot part of the hot end, although it is in the photo of the product.

Revainrating 3 out of 5

Broken nozzle

I don't often write reviews because 99% of the time I get exactly what is shown, but in this case the hotend I received was exactly as advertised but the attachment that came with it was faulty. As you can see in the picture the nozzle on the left is what comes with the hotend not the 0.4 as the nozzle on the right is the standard 0.4 nozzle that comes with the printer is delivered and the difference is quite obvious. When ordering, make sure your nozzle is not defective.

Pros
  • Our hotend kit does not include heaters, but we leave space for heaters, so you can set up heaters with different wattages to suit your personal circumstances.
Cons
  • Very expensive

Revainrating 1 out of 5

Will not work with Ender 3 with glass bed

bought 2 (to have a spare after replacing the original hotend) and once installed I couldn't get on the bed low enough. After measuring the whole part, I found that the hot end is 1.7mm longer than the original. After taking it apart and inspecting each part, I found that the heatsink was milled 1.7mm thinner than the original heatsink (see pictures). If I didn't already have a 3mm thick glass bed this might work, but at the moment I can't use it on my printer at all.

Pros
  • Metal hot end kit, fits almost all Creality Ender and CR series printers. The hotend is pre-assembled for easy installation.
Cons
  • Slightly torn

Revainrating 3 out of 5

Not what you think. Normal bearing replacement! Not "All Metal "

I bought this because the description said "Metal" Hot End. Technically not a lie, but all hot ends are metal. When someone talks about hot metal, they usually mean a neck that doesn't require PTFE tubing. I bought this to replace the am Ender 3 and this one in particular is the same as the factory end which requires PTFE tubing. I will add one thing. The overall quality doesn't seem bad, the design looks the same as the factory. Ende and the guy who left the comment saying it didn't fit in his

Pros
  • Strict Process: FEMBW Metal Hotend strictly follows the manufacturing standard, greatly reducing the risk of clogging and uneven extrusion, ensuring stable performance. How to frequently replace the PTFE hose that requires less maintenance.
Cons
  • Long delivery time