INETUB BA71TGS .035-Inch Gasless Flux Cored Welding Wire - 10lb Spool: High-Quality Carbon Steel for Efficient Welding Review

Excellent filler wire. It is very easy to fold beautiful beads. In about 20 minutes with my new machine and this welder I made professional looking welds. I have been welding with my Lincoln ac Tombstone welder for many years and have never had such clean welds. Also too strong. Recently used to weld an extension to a hand drill. I was blown away immediately when the machine caught at the root and bent the tip of the shank, but the weld holds with no problems. I've done a few projects and…

This wire is great because it welds extremely well. Low flow smoke so you can see what you're doing. It puddles well so you can fill in gaps and holes in thinner metal when it's rusty and dirty. I ran this wire on the old pipe, on the new stock, and on the sheet metal. I use it on a Lincolnweldpac 100. It's a national brand I will never buy again after using this wire. The two pound buns I bought from RK were so bad I thought I was going to lose my sight and not be able to weld. It turned out…

My favorite wire so far. It welds cleaner and has less sticking to the tip than others I've tried. Before using this stuff, I ran a whole 10 pound spool of Lincoln wire through my welder - it wasn't that clean and the welds weren't that good. When working with higher currents, it really shines, even when welding. rusty metal. I recently built a tractor plow with it and although the plow broke due to more than expected force, the metal I used actually sheared off but the welds held up strong. I…

I use this to weld thin wall galvanized square tubing for greenhouse benches with a Hobart 120v machine. It's difficult because there's a lot of edges and gaps, plus one girl. The coverage is variable. I ran out about 1/3 of the work and didn't have time to drive into town to get more, so I ordered it online. Due to a very negative review I didn't want to buy this wire. My concerns grew when I opened the box and saw that the wire's coating was somewhat matte as opposed to the very shiny wire…