🔍 Enhanced SEO: Beck Arnley Disc Brake Pad Electronic Wear Sensor 084-1527 Review

Great buy for the price. I changed the brakes to gl 450 and forgot about them. The warning light was on so I ordered it and it went off as soon as I put it in.

Used these on a 2011 GL450 - fit and work well and they appear to be well made. First I didn't insert the rear sensor far enough into the socket hence the brake wear indicator stayed on - my mistake and after correction the indicator disappeared.

used part above, part from Revain below. This part will not fit the 2013 Mercedes ML63 AMG with the P30 performance option which includes Brembo brakes. Likely not to fit the 2013-2016 ML63 AMG with or without the P30 package. At least the return was easy!

You may need 2 or 4 sensors. Some models have only one sensor on each axis, others two. Suggest you try to remove the old sensor before pulling the pads. If you can take it off with the pads installed then you're in luck as you can replace the pads and install the sensor at the end which is easier.

I bought another one from Uro Parts and the cables were not protected by plastic protection like this sensor. The reason I had to buy this one was because the uro wires broke! It is therefore a quality unit. The cables need to be protected because they are so close to the fast moving parts of the wheel and the parts of the brake that get very hot.

You know that sinking feeling and wallet-crunching effect when the brake wear indicator lights up on your dashboard? Yes, I have! This is exactly what you need when changing the brake pads. I replaced all 4 wheels with new pads and front and rear wear sensors. A few hours and you're done. Exactly what I needed and the price was great.