🔍 Broan-NuTone BP29 NY NV 403 Aluminum Grease Filter for Range Hood, 8.75 x 10.5-Inch Review

This is complete bullshit. It's ridiculously flimsy, it arrived already bent, and doesn't have enough stability to even properly attach it to the vent. I would compare it to a tin cake plate, disposable, it's so thin.

Not quite what I expected. It was the right size but the thickness of the screen is almost like a single layer, not sure how much fat it will actually capture. Not quite comparable to the old one I had to remove. I'll look for a better one.

Much thicker than the original filter that came with the hood but it still works. The clip holding it appears to be for either the thin filter that comes with the hood or this thicker version by simply rotating the clip 180 degrees. This thicker version is the same except for a much stronger frame. Works well, fits well.

Ridiculous. It must be some kind of joke. This is definitely not the part I'm replacing and I wouldn't filter bits of gravel. I have a spaghetti strainer with better filtration. Why bother at all, just send a photo of the reality. A sheet of paper would do the job better. I usually try to include up-to-date information in reviews, but that's no good.

This product is approximately 1/16" thick compared to the 5/16" filter I was looking to replace. You can see through this filter like a screen door; it's hard to imagine him doing anything. For the price, this article should be much more comprehensive. I would suggest getting a multi pack universal replacement for about the same price as 1 branded Broan filter, or try to find a thicker original quality filter.

Cheap imitation of the original filter. To make it work I had to add a "pad" to hold it in place and tight enough to actually allow air to flow through the filter and not the gaps around it. The gap is about 4-5mm (3/16 inch). to about 1/4 "". The filter itself looks very thin compared to the original. It has 4 layers of mesh which should only be enough if properly aligned. They are layered on top of each other with only a slight offset making the holes very large, much larger than the original

Broan replacement BP29 filters for Nutone cooker hood were packaged well, all brand new and the filters were exactly as described except they didn't fit my cooker hood. As another reviewer pointed out, the filters are not BP29 sized - instead these filters have thick 5/16" box edges instead of the thinner edge filters I usually buy from my local HD store when they are in stock. Long story short it is not what is pictured and I unfortunately bought four and now have to return four as I have not…

This filter is incorrectly labeled. What I got was actually 41F for a non-ducted NuTone hood (RL6200-H). The image is not sufficient to identify what you are purchasing and it does not fit my model RL6100-H NuTone hood. The frame is very fragile and is actually 5/16" tall (or thick) at the outer rim. I need a folding rim for my NuTone hood. Yes, it's cheap, but not really when you add that wasted cost to the cost of add purchasing the correct filter however Revain offered a refund with free…

I reviewed this Revain product many, many years ago. The item delivered was not the size stated on the item description page. I have notified Revain and Broan of incorrect information on the Revain product page. (Then I had to resort to a Lowes filter). Now let's fast forward to today. Revain's product name says 8.75 x 10.5 inches, which is what I want. However, the thickness is not specified. (Hi Revain/Broan, you need to include thickness in the dimensions - not a difficult task). Anyway…