🔧 High-Quality AUTOKAY Carburetor Carb & Gasket— Perfectly Compatible with AM125355 LT133 LT150 LT155 LTR155 GS30 Review

Delivered quickly, in good condition Post arrived works fine. There is no longer a magnet under the carburetor bowl for fuel flow. It doesn't seem to matter yet. However, since fuel flow is easy to overflow on rough ground, the loss of solenoid control can be a disadvantage. When it stalls I have to wait about 15 minutes for the flooded carb to clear. Then it will start.

At first I noticed that the pads were pretty flimsy and very flimsy. I checked the carburetors, everything works, everything is fine. Installed the carburettor, but the engine does not start, checked the fuel twice, everything is fine. I tried again and it started but had trouble running, lots of black smoke which is a sign of over fuel. I checked the float, it wasn't hanging in the open position, I tried again, no, same thing. Installed my old one after cleaning and it works great now. I do…

LT155 sat in the garage for about 10 years - exposed to all the elements and completely abandoned. Just a few weeks ago I had to lug it into the garage to see if I could run it during quarantine. A stuck piston and sticking fuel lines and carburetor - long story short - couldn't save an old Walbro carburetor and bought this one. about 10 minutes on the lawnmower, it started right away, adjusted a bit after it got warmer and now the tractor is driving. Very happy.

Bought last month to repair/replace an old carburettor on my LT155 John Deere rake. CONS: 1. Look closely at the pictures, there is a plug on the side of the carb opposite the fuel inlet, there is a fuel mixture screw on my original carb. So the carburetor without this adjustment runs full open unless I hold the throttle in the "turtle" position, in which case I have to be very careful to adjust very carefully to get the mower running without stalling or run too fast. 2. Comes without a plastic