Circular saw BOSCH PKS 40, 850 W silver/green Review

I use it for high-quality sawing of boards that are intended for household needs - shelves, stands, etc. For this, I immediately bought an additional circle with fine teeth, because. complete disc with too large teeth.

cool Got pros: not a lot of weight, ease of holding in the hand, exactly what we needed for the house, as well as not large dimensions Cons below: have not yet been found due to the fact that the short period of use (I hope I will not find it)

Candid opinion about the product.Pros: Very light, cuts without problems. You work with pleasure. Different cons: I would like to extend the wire and adjust the depth of cut.

Very light. I took for crates, plywood, osb. Lobzik for a very long time. I was looking for exactly Europe, I hope there is still quality left in Europe. I recommend to all. No need to think that she will dissolve the forest up and down, she is just for sheet materials and inches!

Has some pros: For homework, that's it. If you adapt, you can quite evenly cut plywood and cut bars up to 40 mm. The main thing you need is at least a folding table so that all this can be done conveniently. Has some cons: The disk immediately changed to a variant with more teeth so that the cut was cleaner. With Leroy Merlin sold for 600.

It's nice to hold in your hands. Maybe someone will be interested, I shot a video with a review ? v=xWPaMwfqff8 Has pros: Works well, made perfectly, immediately visible, German quality Cons below: The board 40-ku does not cut a little bit to the end, it is necessary to turn it over and pass it again.

It was bought as a gift for her husband, having previously learned all his wishes, having studied the market, the choice fell on this model and was not mistaken. For an apartment, the very thing, my husband is satisfied, and I am guaranteed built-in furniture in the apartment.

This circular was purchased specifically for the house, for furniture. Although I think it will also come in handy in the country. Mainly for chipboard or whatever is not thicker than 30cm. Worked continuously for two days. Forgot about the jigsaw. I think it's worth taking.

Different pros: Saws plywood 15 with a bang, drank a good one if you do not rush without burrs, the laminate does not colitis in general, I like it, Cons below: It’s a bit inconvenient to follow the cut line, especially when you need to cut to a certain place, you have to look in order to see the disk.

Not everything can be accurately cut in the store, and you still want almost no chips. You understand that the amount of work for a jigsaw becomes too big, the requirements for the surface are higher, you have to buy a hand-held circular saw. For home use, I did not want to take something powerful and heavy, so I began to look at models that I could hold in my hand on weight for some time. You have to cut no more than 15-20mm plywood or MDF. The store has a lot of different china at a price…

Here you need to understand that it is suitable for the dissolution of the forty, and will do its job, but it is better to use something more powerful for this, and this device is for numerous small jobs at a construction site, so that the hand does not dry out from a two-kilowatt circular Pros: Excellent device: lightweight, comfortable, accurate water depth scale, powerful enough Cons: the glass with a cut line marker is somewhat mowed, but it is essentially for an approximate setting of the…

I was looking for a second saw, the first 210 diameter and weight of six kg. I always work with a guide - with my left hand I hold a home-made guide with my right hand, I drive a saw. For example, when sampling a groove, when you "shred" a section, your hands get tired quickly. I looked closely at the Chinese grinder type with a disk up to 125 mm, but it is for 5 and most importantly, her disk is on the left side, when working with the guide, the saw will have to be held with the left hand. I…

Some pros: Light weight, fairly clean cut, not noisy, a decent disc included. With its cons: The platform is stamped, but the thickness and rigidity are normal

I liked its weight, enough power for domestic use. A friend of mine has had the exact same one for more than a year, and in fact, having used his saw, he bought himself the same one.

To expand the functions and ease of use, I decided to make a mini circular machine based on this saw, since slats, small boards, etc. are often needed. The box is made of 20mm plywood (34 x 29 x 17cm). The protective cover has been removed from the saw. It is fixed to the table with 4 screws. Installation and removal of the saw takes 10-15 minutes. Little improvements remained: install protection on the disk, paint and make a parallel emphasis. In operation, the machine proved to be excellent…

I took it to work with lining - I did not lose. Great stuff and a pleasure to work with. With its pros: Lightweight, sufficiently long and soft wire, the mechanisms of inclination and cutting depth work perfectly, a very convenient sight (it was not accurate out of the box, but it is easily adjustable), a high-quality side stop. Has cons: The side stop should not be brought closer to the disk than 29 mm, the plastic protective cover - how long it will last - is a question, besides, it is wide…