Cooler ID-Cooling IS-40X V2 LGA1700/1200/115x/AM4 (92mm fan, 800-2800rpm, 46CFM, 14-35.2dBA, 100W TDP, 4-pin PWM)BOX Review

Good video, it shows how NOT to mountcomolers - ? v=mALfZmxyOQ4. The lack of a backplate will cause deformation of the motherboard, or incorrect clamping of the processor (skewed)

Purchasing is not something I encourage doing. During the installation process, the bolts do not even reach the grooves in the motherboard (see photographs), so you have to tighten them "by eye." If you aren't careful, even a small amount of overzealousness can cause the motherboard to bend and become damaged.

The installation, which was not the conventional approach, left me perplexed. However, it appears to hold and fit appropriately. After installing a processor on a 35w motherboard, I discovered that there are in fact no issues with cooling.

Because of its pricing, versatility across all platforms, and height proportions that feel fairly joyful among competitors for cooling stones in the starting and middle price range in compact cases with a hard limitation on the height of the cooler.

In my opinion, it's the best deal out there! It cost me 900 dollars, and it is unreasonable to expect a backplate for that amount of money. Please pay a higher price for the cooler if your hands are crooked and you are nervous about exceeding your withdrawal limit. for am4 socket: The issue with the backplate can be fixed in a quarter of an hour using only the following tools: a screwdriver, a 4 mm drill, a hacksaw, and a needle file. We take a native backplate from the mother (or one that I…

This Ryzen 4600g small cooler does a great job at keeping your processor cool. The spindle has a diameter of 8 or 9 centimeters, and four copper tubes join the radiator to the bottom. In terms of noise and temperature, I have no complaints (about 34-35 degrees in the system without load), but you should consider your needs and the demands of your tasks before making a purchase.

I'll start with the positive: tiny size, silent operation, good performance. It is essentially silent in a mini-ITX case with an i3 processor, and the temperature did not rise above 55 degrees under full load. The bad news is that the cooler base just does not extend to the CPU cover due to the terrible mounting on the 1155 socket, the threaded bushings being 1 mm longer. I needed to toil. The sole is precisely bent, with a 0.5 mm deflection in the middle! To get a plane, I had to pound on a…

Fits in a very small space, as its maximum cooler height is only 47 mm. The i5-4670 processor has been moved over from the primary PC (84 watts, according to the standard). The fan runs at 1100-1300 rpm at 35-40 degrees and is completely silent. When subjected to stress at temperatures between 65 and 70 degrees Fahrenheit, the fan speeds up to between +1700 and 1700 rpm, producing a faint hum. I opted to switch out the fan because the job requires complete stillness. Only the noctua nf-a9x14…

Someone even recklessly tightened it to the point where the motherboard was bent; several people in the evaluations noted that attaching the cooler is risky owing to the lack of a backplate, and someone even did that. If you have sharp claws instead of hands, then no, this is not the appropriate cooler for you. I started by hand-tightening the bolts all the way to the stop, then I used a screwdriver to give them a further half turn, and now the job is finished! Because the contact is relatively

It was an incredible surprise to see that I could get inside the mini-box M350 and still fit the Intel DH61AG motherboard into the tiny mini-itx system, and it fits wonderfully. At that pricing point, there is just no one else who can compete with him. After the image has been modified, it can be placed in open cases (was it in open cases when you built the system in Powerman EQ-101?). Its benefits include the following: 1) All of the benefits of the standard is-40v3, such as the low noise…

Sincere cooler designed for the AM4. Compatible with the Hong Kong 2600 (both stock and simple overclocking). The TDP is still holding up, and we are probably going to hit 2400G with a guarantee of reaching 2200G. Hong Kong 2600 resisted OCCT which ran 96-108 watts - peak 75 degrees Celsius, vrm - did not warm up, under aida (80 watts) - 63 degrees Celsius under easy overclocking of 3.7GHz for all cores. OCCT resulted in peak temperatures of 75 degrees Celsius.

After a month of use, I am able to tell that the cooler is fine and it is sufficient. I purchased it for my Ryzen 5 2600 system. The temperature is 40 while it is not being loaded, and it did not rise when it was carrying more than 56 pounds. In addition, my computer is housed in an old, compact chassis that has a power supply unit installed on the top of it, one 80 mm fan for exhaust, but no fans for intake. Has pros: The cooler itself is nice, and it retails for 200 rubles less than it does…

After reading for a considerable amount of time about a wide variety of coolers, the objective was to bring the temperature of the Core i7 9700 (without K) down. "According to the passport," it has a TDP of 65 watts, but looking ahead, I can state that all of its 8 full-fledged cores, of course, send out 100 watts when they are under load. The boxed cooler, which is made entirely of aluminum, immediately soared beyond 100 degrees, and the percentage, respectively, in TermalTrolling. However…

Bought a total of 8 pieces. To a large extent, content. However, bending them is highly dangerous when, as a result of a flaw in the manufacturing process, they do not fit into the casing by a distance of 3 millimeters.

The criticism was inspired by a flaw. I bought this cooler without considering the sort of attachment for am4 moms. The mother arching that PPC after only two weeks of use. That might be the last for her. This drawback may be readily remedied, at least for the AM4 socket, if the maker simply used longer bolts, as is done on a regular back. After 2 weeks of use, the mother arch can be seen in the photo (after removal, the void was even more pronounced). If so, this cooler is a fantastic value…

Disappointment. I wasted money and wrecked the ordinary backplate that came with the motherboard since it was necessary for me to do so. It performs only marginally better than a boxed piece of metal when subjected to stress tests.

Pros: copes with zeon e3 1240 v3 tdp 80w easy to install normal paste included Its cons: a little noisy but it's not a pinus and it should be so in this size

Pros below: small height, can be fixed on the ITX board so that the memory does not interfere Cons: The pressure on the heatsink sole is uneven and requires more thermal paste for a uniform fit.