Header banner
Revain logoHome Page

Reviews

Global ratings 40
  • 5
    27
  • 4
    9
  • 3
    3
  • 2
    0
  • 1
    1

Type of review

Revainrating 5 out of 5

I am very happy with this purchase, I will advise everyone!

One single engineering solution made it possible to make a small case for large components. All that was needed was to move the power supply to where hard drives are usually placed. The second correct engineering solution: the perforated walls of the case allow you to effectively cool the CPU and GPU for such a small volume. Although I expected more from perforation. The third correct engineering decision: we moved the hard drives to the back wall, behind the motherboard. But now it is applied…

Pros
  • 1. Not big. Really not big. 2. Despite the fact that the external size is not large, a full-size ATX fits inside. Although under certain conditions. For example, together with a large ATX it is not possible to install a 140mm fan at the bottom. Although no one has canceled ing, and with a strong desire, everything is possible. 3. Thoughtful cable management. Nothing sticks out / hangs / dangles anywhere. 4. You can install either two 3.5 or four 2.5 HDDs. Or one 3.5 + two 2.5. 5. One of the covers is transparent. If everything is properly laid inside, it looks nice.
Cons
  • 1. Although the body is perforated, the air exchange with the outside world is weak. In English: there are almost no drafts. And I would like to. 2. The transparent lid is made of Plexiglas - no matter how careful you are, sooner or later it will get scratched and lose its presentable appearance. 3. For some it may be important: it is not possible to install a CD-Rom or Floppy into this case. Nothing is provided for them. No fasteners or holes in the case.

Revainrating 5 out of 5

I would definitely recommend the purchase, I don't think there is anything wrong with it.

#CoolerMaster return the handle from the case!)) And add tempered glass option to this model. This body is the BEST! I highly recommend buying! Pros below: The best MESH case! at an affordable price. 1. In fact, this is a sieve with grids on magnets. And a chic mesh design. 2. One fan is ALREADY included, and this is the most important fan in the system - it is located just behind the processor heatsink - this will be enough for a standard system. 3. If you wish, you will have many options for…

Revainrating 3 out of 5

Expectations were not met, average quality.

They didn’t report 4 screws, that’s for sure, because when I opened the bag I counted everything and of course nothing fell on the floor and it couldn’t have been 4 and only 4 at once, so much so that I didn’t notice . The strange design of the hdd mount, although you can live. Some pros: Dust filter mesh on the front panel of the case and the same on the top. Got cons: Mediocre quality leaves a lot to be desired. Strange fasteners for the walls of the case and other things, everything is too…

Revainrating 5 out of 5

Reliable purchase, guaranteed to be a good purchase.

With its pros: small, comfortable, a lot of space for wires behind the back cover, I have a corsair CX750 PSU, it has a LOT of wires, and everything fits in the back + the hard drive is also in the back, there is a lot of space for ssd there are also rubberized legs for them. you can install 5 coolers or 3 coolers and CBO, the panel with buttons can be installed in 6 places and even on the back cover. this is done because the rear bolts are made like legs and the case can be safely placed flat,

Revainrating 3 out of 5

There are pros and cons, think before buying.

I will change to another one soon. It is not convenient to turn on, it takes up more space than expected, it is not convenient to connect flash drives and headphones (on the side). With its pros: Ventilated anywhere and everywhere. The legs allow you to put it on its side and in general as you like. The cover with the power button can be installed at any angle. Its cons: USB ports on the side are a bad idea. The computer is on the shelf of the table, and inserting a USB flash drive or gamepad…

Revainrating 5 out of 5

I am amazed at how well the product is made, just magically!

Pros below: Compact and fits all accessories. The video card can be inserted the longest. A good fan with a case does not make any sounds at high speeds. Different cons: The front panel cables are a little short, or rather the USB 3.0 cable. Side panel made of plastic scratches a lot

Revainrating 4 out of 5

I am satisfied, the product fully corresponds to the description.

In fact, the case is good in everything except the build quality. He would have had normal metal, tempered glass, and more reliable dust filters - and there would have been a top case for microITX assemblies. Albeit to the detriment of the price. Although, as for me, even now it is a little overpriced, for 3k there are plenty to choose from. Has some pros: - Beautiful - Nothing extra inside - Ideal airflow - leaky through all edges, you can wind a bunch of coolers - Plenty of space for cable…

Revainrating 5 out of 5

I do not cease to rejoice at the purchase, a very good deal!

Although I did not list all the advantages, such as: the presence of a window on the sidewall, the small size of the case, or, for example, the ability to use dropsy. Understand that these are all obvious things that many people understand even without the tension of convolutions. Therefore, I wrote briefly about those things that are necessary to form a true opinion when buying a product.

Pros
  • This case was acquired relatively recently, but this time was enough to form an opinion and give a full detailed answer to the question of the expediency of acquiring this case. I will say right away: the case is definitely suitable. And that's why: - Custom design. Very simple and at the same time different from the models of competitors. - Thoughtfulness down to every screw. Here you can say "yes he drives, there are short wires", but no. They fit perfectly under the wall so that there was still a couple of centimeters left. (On the example of a mAtx format board) - Well, the last thing I wanted to focus on is the wide possibilities of modding. Want backlight? Please. There is plenty of room for this beauty. Or maybe it seemed to you that there was not enough space for an air duct under the power supply? There is also a solution here. Factory legs easily snap off, and instead of them you can put something more interesting. (Immediately after the purchase, I put rubber 3-centimeter legs bought in the building)
Cons
  • The disadvantages can be attributed (and even then it is doubtful) only that although it is perforated (i. E. "leaky"), but due to the magnetic design lining, there is no air movement in the case. This problem is solved simply - use 140mm coolers (and say "thank you" for the modding opportunity)

Revainrating 5 out of 5

A very high-quality product, I take it not for the first time.

As such, there is no beauty in the body. Although simplicity itself is very beautiful. Coolers (140 mm) blow through the entire case well. This is enough for M.2 and Video and memory power. There are quite a few alternatives on the market. To sum up, I am very pleased with the purchase. The main thing is to understand for what purpose you take the case. I liked this body immediately both in the picture and live.

Pros
  • It is difficult to describe the advantages of a budget building, but let's try. + Perforation of thin (more on this below) metal on the edges allows you to blow through the case very well. And there is no extraneous noise from the stream. + It is possible to place two 140mm coolers on the front and top panels. If you take normal blades with PWM PST support and connect the chain to the motherboard, then silence is guaranteed. And blowing the system will be redundant. + The case is so simple that the aesthetic elements are also dust screens. Which on magnetic tapes are kept on the edges. Simple and beautiful. + The insides are thought out well for a budget employee. Perhaps the location of two HDD or three SSD. If we talk about SSD, then the location is as follows: two in the cable channel, one on the plane of the motherboard. But with the HDD, not everything is so simple. You can hang one near the motherboard, but it is not recommended because of the thin metal and possible vibration. The only correct location of one HDD (3.5) in the cable channel. On one side, the HDD is reinforced with a special bracket, and on the other side, a metal case cover fits snugly - which is also a heat sink for heat dissipation. + It is possible to install any power supply - there is plenty of space. + A long 1070ti graphics card with three screws will easily fit. +The arcric freexer 33 cpu tower cooler fits comfortably. + The block of control buttons with two usb 3.0 can be moved along the edges of the sidewalls. Both on the right and on the left side. Covers are interchangeable. + The body can be positioned horizontally. There are side legs. I'm sure Cooler Master engineers wanted to use it horizontally. Since from the bottom there is quite a bit of space for air intake under the power supply. If you change the cover in some places and put the body on the horizon, then the body is given a certain "rigidity" and all vibrations are damped. An ingenious solution for such a flimsy case. + Ability to hang the radiator on the front face. + The price is attractive. I took for 2650 at the peak of sales on 112022.
Cons
  • Now for the cons. - The metal is very thin. Very very. Nearby there is AeroCool Qs-240 Black, and even then it is more massive. This means that there will be unnecessary vibrations and they will have to be eliminated with weights. - There is no place on top for a radiator, only for a 120 or 140 mm cooler. - Putting LED illumination is simply pointless. Really beauty is not visible. Well, something glows and blinks. Only annoying. - Side plastic "transparent" cover. She scratches at times. More spoils the whole body. If you want a window, buy glass. - The space for air intake under the power supply is very small. It's almost non-existent. But the legs from below can be safely removed and finished to the desired state. I just glued a thicker piece of rubber. Then I laid the body horizontally. - Coolers are screwed on. This means that all vibrations are transferred to the body. It is not possible to put rubber pins. Although if you remove the dust filters, you can, but it spoils the whole aesthetic. - The cable channel is designed for a minimum of wiring. But if you have removable cables from the PSU, then there is no problem. - The wiring from the external panel is quite short and it is very difficult to bypass it through the cable channel. But this is only if it is at the very top. Move the panel to another position and the length is enough. - Strange smell. But this is temporary. Hope. - The plane on which the motherboard is attached is quite thin and if you make an effort, you can turn the screws. Be careful. - Although the engineers prepared a place for the HDD by equipping it with a reinforced bar. But the temperature is still there when you load the disk to the fullest. I'm thinking of putting a small cooler in the cable channel. - It is better not to touch the body once again. Do not touch at all. He plays a little diagonally, which is not good.

Revainrating 5 out of 5

High-quality product, the price corresponds to the quality.

Awesome body. Despite the disadvantages, the case still turned out to be very cool, and the gaming PC in it is compact and neat. A 3-fan vidyakha and a tower for the processor climbed without problems. There may also be little space for ceiling fans because of the tower. Look at the height. Some pros: Small, compact minimalistic design Magnetic dust filters Price Can be installed in any position, even upside down Rubber feet Window Moveable front panel Perforated housing (good ventilation) With

Revainrating 5 out of 5

Quality is top notch, happy with everything.

Happy with the purchase, no regrets. Yes, it was possible to buy a large case for such an amount, possibly with good glass, but I needed the size. Different pros: Small, light, comfortable, roomy, good ventilation - all in a hole))), the ability to install a standard ATX power supply. Cons: Thin metal, but lightweight. The transparent plexiglass cover is quickly scratched, but everything changes when they arrive - a transparent bro film and normal hands.)))

Revainrating 5 out of 5

The perfect purchase for me, exactly what I was looking for!

To accommodate motherboards of an unsupported size, in principle, you don’t even need to make any holes here, buy any set of additional legs-racks for the motherboard and twist them one-by-other with the input thread to the back of the case. The remaining 6 screws are enough to hold the motherboard in place - but so that the board does not walk when it cools down, it would be better to have this kind of support. With this placement, the power supply will not fit into the case - not at all, but…

Pros
  • Low price, good looking. Convenient SSD mounting system, you can place 4 SSDs or laptop hard drives with it. You can put a FULL-ATX motherboard into this case, in principle even an E-ATX (but see below for special conditions). Large CPU coolers with 14cm fans can easily fit in. And long video cards with 3 large coolers up to 36cm!
Cons
  • This is a case for medium budget systems. Pretty cheap metal - flexes effortlessly. You can install 5-6 coolers in this case, unfortunately you will have to install them, since the air passage is limited by the mesh filter and perforation. Yes, you could install a water cooling system on the processor in this case, only it will work 30-40% worse due to rare perforation.

Revainrating 5 out of 5

Offset vents = no top fan support

All vents are offset. 120mm or 140mm fans will not work on top. None of the holes line up anywhere. And what's the point of supporting the bottom fan if it's barely 2mm off the ground? Moved my build from the HAF 932 Advanced to this one which significantly reduced the size but increased the space. and portability.

Pros
  • Comfortable
Cons
  • No performance

Revainrating 5 out of 5

Quality case for your money!

I really like how this case and build fit together. Plenty of room for easy assembly, and I like the ability to move the power/USB around instead of leaving it in the same place all the time. The installation of the SSD is neat, I like that the case doesn't have a big metal stack on the front for the HDD, but the HDD is hidden behind the back panel, which still leaves plenty of room for an extra cable. The power supply mounts securely in the case with a bracket and mounts slightly further into…

Pros
  • Easy to read control panel
Cons
  • Ugly packaging

Revainrating 1 out of 5

Aesthetically pleasing customizable mATX case

This is my first Micro ATX build and the main reason I went with it is the unique look of this case. Most other small cases are cube shaped, which isn't my style, so this case really stood out. It's quite small (which I like) but has enough space to work. It is also lightweight and ideal for carrying. All my previous cases never had enough space on the back for cable management, but this case has enough space (you can put a regular hard drive in there). There are also 2 SSD slots. I would…

Pros
  • New
Cons
  • Negative impression

Revainrating 5 out of 5

Big Budget Micro-ATX Case

I was looking for something smaller and affordable to migrate my Micro-ATX system from an old Antec 900 that would provide decent airflow for my 4790k and RX 580 , and I chose the Q300L TUF version. There is ample space on the back for cable management, but I suggest using a modular power supply to save space. I have an older Corsair CX750 that isn't modular and finds it difficult to close the back cover completely and I don't have room in the back for my RGB controller and all the wiring…

Pros
  • Stylish and Modern Design
Cons
  • Slim

Revainrating 5 out of 5

Staggered vents = no top fan support

All vents are staggered. 120mm or 140mm fans will not work on top. None of the holes line up anywhere. And what's the point of supporting the bottom fan if it's barely 2mm off the ground? Moved my build from the HAF 932 Advanced to this one which significantly reduced the size but increased the space. and portability.

Pros
  • Few competitors
Cons
  • I'm concerned about this

Revainrating 5 out of 5

Q500L - Cools well when assembled correctly

Case is decent enough (remember you're not spending a lot of money on this guy). Suitable for full size GTX 1080 TI and Ryzen 7 2700x. I've seen many complaints about "no airflow" and overheating machines (even from "professional" reviewers) and I think I've concluded that they just don't work. know what they are doing. If you're building ATX, your power supply is on the top/front of the case. A 140 mm fan can then be installed directly underneath as an intake air fan. Exhaust 120mm standard…

Pros
  • Computer Components
Cons
  • Has flaws