30Mpa Blue Creation Core High-Pressure PCP Hand Pump with Air Filter, Water-Oil Separator, and Quick Connect (Female and Male) for High-Pressure Air Compressor Pump Review

Extends refueling time. But it's better to have a little more time because your equipment is worth it. It's good to deal with. However, I suggest that you make the receiver end and sleeve out of stainless steel. I don't trust brass under this pressure

Quick disconnects, socket and plug are undersized and sub-standard resulting in air leaks and potentially hazardous conditions. I have a GX portable pump and it doesn't fit. All my other quick releases fit correctly. I had to go back.

Great buy! Is carried out between the filling sensor and the quick coupling of the compressor hose. Both "ends" of this device fit perfectly. I have to agree with other reviewers who recommended buying and using the 3/4" thick filters sold for Yong Heng compressors. The small filters that come with this unit "work", but are ineffective. Most of the volume in the unit is left unfilled. This unit really needs longer and thicker filters. Just my 2 cents.

I've been using mine for a few months now and have never had any indication of a leak. The small filter works well if you change it regularly. Not all devices are the same. There are very slight differences in tolerances, sizes, shape, bevel etc with all this cheap hardware including hose fittings etc. It either fits you or it doesn't. No one uses lab plugs here. You may need to try several different sources to get one that works with your existing fixtures. There is no magic tool that works…

We managed to fix it with Teflon tape or pipe sealant, tape the threads and reinstall it. It worked fine after that, although I expect it won't last 6 months. we disassembled it. sealed with sealant and installed. normal chinese junk. everything they do is a copy not intended to be used. Of course it is. Shame on companies that allow their products to be made to such poor quality! This applies to ALL companies that use porcelain to make their products. Nothing that comes out of this country is…

After returning the first CREATION CORE HIGH PRESSURE PCP HAND PUMP AIR FILTER OIL SAVER WITH INTERNAL AND INTERNAL QUICK CONNECTORS for replacement, I will be returning the second quick connector with the same leaking problem with the external fiber air filter . The fitting is very poorly made and does not allow for secure fixation of the internal QD. Machining tolerances have nothing to do with acceptable industry standards. not connect at all. If the treatment was almost correct and held the

Glad I spent some time checking this out. On my first try, there was a slow leak from the female quick connector. unplugged it and vented my PCP without it. I got a replacement female adapter only to realize I was wrong. So I looked inside the woman and could barely see anything that looked out of place so I figured the o-ring was bad. After trying a bit different things I was able to get the O-ring out. I found that there were two O-rings in the adapter. When you order this filter, they supply