🔧 Daystar 2" Rear Lift Kit for Dodge Ram 2500/3500 - Fits 1994 to April 2013 2/4WD with Dana 70 Rear Axle (Without Top Mounted Overload Spring) - 4" Diameter Axle Tube - 16.4" Round U-Bolt - All Transmissions and Cabs - Non-Dually - KC09130 - Made in America Review

Will not fit 2011 piston 2500 threads on u-bolts are not long enough leaving about 1" of play in the seat and overall U-bolt diameter, the bolts are too big to fit inside. It only took me about 2 hours into Race 101 to realize I needed to get things back on track.

Purchased for 2011 RAM 2500 Cummins. The U-bolts were VERY long and the blocks really don't sit well on the axle. Wasn't impressed.

For 2012 Dodge 2500 Crew Cab without overload spring. The blocks were well made, but the U-bolts were too long and thick to fit in the brackets placed on top of the leaf springs. I would not recommend it. The Lift Ready is a much better kit for the Dodge 2500.

It was listed for a 2013 Ram 2500 4WD but will not fit. First, the U-bolts are too big to go through the holes in the plate, and second, there aren't enough threads to fully tighten them. The shop that installed them had already disassembled my truck before they realized they wouldn't work, so I had them enlarge the holes on the plate and after that they had to drill another 1/2" holes to tighten them up. The seller doesn't want to do anything to fix the situation. They tell me I should have…

I installed a 2012 Ram 2500 with this kit. There are several kits that will let you know if they will fit your truck on this website and the Daystar website. First I bought the KC09124 kit. The U-bolts were the wrong shape. I returned this kit and bought the KC09130. Everything looked fine and I made sure the U-bolts matched my axle before taking everything apart. I put the blocks in place and started installing the U-Bolts only to find I had a heck of a lot of time to install the mounting…