🔧 Enhanced Delphi AF10058 MAF Sensor with Advanced Air Flow Technology Review

Correct part to repair my P0171 engine on my wife's 2006 Chevy Equinox. I'm glad I chose a Delphi product and not another competitor. After installing a new MAF sensor and clearing the code, everything works fine.

Great idea. Comes with good instructions and videos on You-tube. Lasts 15 minutes after suitcase is removed from vehicle. One thing I noticed is that the guy pushing the device into place must be Mr. Universe. I pressed it against the door frame while holding on to the other side and if you press hard enough you will hear a click.

The first product I had a problem with from Amazon Warehouse was broken. The latch that locks it was broken and lost. I installed it and it fixed the problem so I pulled it back out and put the RTV on the o ring and glued it together all works fine. You can save a few bucks on AW and I do that quite often, but you might need to get a little creative like I did here. BUT IT WAS THE FIRST TIME.

I had an issue with the oxygen sensor trouble codes P0131 and P0151. Because the two lambda sensors on the opposite side of the engine cannot fail at the same time. I've been looking for other possible solutions. A new mass air flow meter can help. It was very difficult to remove the old mass air flow sensor. The instructions say to put the key in the socket, but I was able to find this key. The key turned out to be shaped like a credit card and was in a box. Once I figured out what the key…

after going through poverty codes P0171 and P0174, a service stabilizer, traction control disable messages and after replacing the O2 sensors and PCV valve had received the recommended modification, and after that After much research online I decided to replace the mass air flow sensor. Replacing the sensor alone was worth it, so that it could be exchanged for the old housing without any problems. The guides and videos I found online made it very easy. The very reasonable price also made it…

Excelente Inversión! Tenia mezes con una fake por el gauge maf de mi Kia Sorento 2009 base EX 4x4 engine 3.8L petrol. La falla hacia que la computadora inhibiting the accelerating, dejando una velocidad minima. Including algunas veces se apagaba. The original sensor has a high cost and is not only a plastic base product but also a cambium funciono. Hasta el momento va super bien! 100% recommended

True to the original. The most interesting thing is to pull out the old one. You'll need to remove the flexible air hose it's housed in, and the replacement comes with a small, credit card-sized 'key' that fits into the exit slot and releases the built-in latch that holds the sensor in place. I had to insert a screwdriver into the tube to pry the original sensor out and convince it to come out (while holding the 'button') as the sensor and outer case were made of hard plastic that cannot be…