Header banner
Revain logoHome Page
๐Ÿ”Œ nano-micro-nosolder board atmega328p: compact usb nano v3.0 controller - 5v 16m logo

๐Ÿ”Œ Nano-Micro-Nosolder Board ATmega328P: Compact USB Nano V3.0 Controller - 5V 16M Review

5

ยท

Average

Revainrating 4 out of 5ย ย 
Ratingย 
3.8
๐Ÿ–ฅ๏ธ. Single Board Computers, ๐Ÿ’ป Computer Components

View on AmazonView on ะฏM

Media

(4)
img 1 attached to ๐Ÿ”Œ Nano-Micro-Nosolder Board ATmega328P: Compact USB Nano V3.0 Controller - 5V 16M
img 2 attached to ๐Ÿ”Œ Nano-Micro-Nosolder Board ATmega328P: Compact USB Nano V3.0 Controller - 5V 16M
img 3 attached to ๐Ÿ”Œ Nano-Micro-Nosolder Board ATmega328P: Compact USB Nano V3.0 Controller - 5V 16M
img 4 attached to ๐Ÿ”Œ Nano-Micro-Nosolder Board ATmega328P: Compact USB Nano V3.0 Controller - 5V 16M

Description of ๐Ÿ”Œ Nano-Micro-Nosolder Board ATmega328P: Compact USB Nano V3.0 Controller - 5V 16M

This nano is the smallest, complete, and breadboard-friendly board based on the ATmega328P (Arduino Nano 3.x). It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper. The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source. Get support for free:Our technical support team is always ready to answer your questions.

Reviews

Global ratings 5
  • 5
    2
  • 4
    2
  • 3
    0
  • 2
    0
  • 1
    1

Type of review

Revainrating 4 out of 5

Great value, expect a few extra steps

As others have said they work great if you take a few extra steps. Here they are in short for Windows 10: 1) Download the CH340 drivers. You can find them in many places. I got mine from https://sparks.gogo.co.nz/ch340.html 2) Connect your device with a micro USB cable 3) Locate "Ports (COM & LPT)". In this category you will find Nano. Mine appeared as "RAMPS". If you have other stuff in it, just disconnect and reconnect Nano and see what pops up. 4) Right click on the device and select "Update

Pros
  • glitter
Cons
  • no automatic

Revainrating 5 out of 5

Works well with a few features

These appear to be decent quality Arduino Nano clones, except they come with the USB micro connector you find on the latest cell phones. NOT the USB mini used in the original Nano. USB chip is CH340. You'll need to find and download a driver for this if your system doesn't already have one, or download it automatically. Menu. If you select other options, the program will not load. In my case, a component was missing from the bottom of the board. It looks like this is for a 10k 0603 resistorโ€ฆ

Pros
  • Perfect for outdoor activities
Cons
  • Approximately

Revainrating 1 out of 5

Works best in computer components

This is an overview of an Emake Fun Arduino Nano compatible board. To be clear, this is a clone of the "real" Arduino. For 5 about $20, that's 1/5 the price of an Arduino direct from store.arduino.cc. If you want to use this on a breadboard, you'll need to solder the included headers first. It's pretty simple, but in my excitement I made a mistake on the first header. After desoldering and aligning the pins correctly, I connected it to my PC. It immediately showed up on my /dev/ttyUSB0 port. Iโ€ฆ

Pros
  • availability
Cons
  • weak

Revainrating 5 out of 5

These have some special features.

I bought these mainly for the micro USB interface because obviously we have more of these cables than anyone else. But after a few months of use I can't say if I would buy it again. The fact that they have an old bootloader doesn't matter since you flash them to a new bootloader using a USB card like this https://www.amazon.com/HiLetgo-ATMEGA8-Programmer-USBasp-Cable/ dp can /B00AX4WQ00/ref=sr_1_1?keywords=usbasp&qid=1557912518&s=gateway&sr=8-1. The main problem I had with them is that some ofโ€ฆ

Pros
  • Good product for the price
Cons
  • Some cons

Revainrating 4 out of 5

This is the Nano you are looking for

Finally the Arduino Nano that comes with micro USB connectors instead of the giant mini USB. So far they are working without any problems. The only thing that would be better would be if they had USB ports. However, micro USB is not terrible. Too bad the official Arduino nano boards don't have micro USB. That makes these boards better than the official Arduino product. Update: I originally ordered them in July 2019, February 2020 and received the boards with the regular atmega328p bootloader. I

Pros
  • Finally bought it
Cons
  • Can I add something