110V, 100W Enduro Sewing Machine Motor Kit with Foot 🧵 Pedal, Belt - for Imported & Domestic Home Sewing Machines (Black) Review

I may be lucky but my motor runs well, the pedal speed control works well and although the quality of the fork could be better it also works well. No cutouts. There is no hesitation. No overheating. Everything is assembled correctly. I used the motor to build a standalone winder for my wife. Very easy . board, winder and motor. It works fine too. This required some adjustments. The tension washers had to be polished. The spool spindle had to be wedged wider. I had to adjust the position of the…

I have used this motor to power an inexpensive Chinese leather sewing machine. Since I needed torque and low speed I used a pulley system to slow it down, after checking my math and checking an online pulley calculator it ran too fast. perhaps it is because the engine speed is not the declared 6000, but is almost twice as high, from 10,000 to 12,000 rpm. I had to readjust my pulleys to get the speed and torque I needed. Update: The included pedal is junk, basically on-off and with some rotation

Suitable for the new HOME MyExcel 23L sewing machine. The engine failed as described above. Looking closely at the Enduro, it turned out that the motor dimensions were the same, so I took a chance (somewhat since it was reversible) and bought the Enduro motor. The new motor fitted into the existing bracket and I simply hooked up the motor to the same 115 VAC used for the failed motor. The engine ran clean and smooth, and the existing power pedal speed control worked great. I was expecting some…