Header banner
Revain logoHome Page
🔧 2.5 inch stainless steel butt joint exhaust band clamp sleeve - 2pcs by evil energy logo

🔧 2.5 Inch Stainless Steel Butt Joint Exhaust Band Clamp Sleeve - 2pcs by EVIL ENERGY Review

4

·

Very good

Revainrating 4 out of 5  
Rating 
4.0
🌫️ Exhaust & Emissions, 🛠️ Replacement Parts

View on AmazonView on ЯM

Media

(4)
img 1 attached to 🔧 2.5 Inch Stainless Steel Butt Joint Exhaust Band Clamp Sleeve - 2pcs by EVIL ENERGY
img 2 attached to 🔧 2.5 Inch Stainless Steel Butt Joint Exhaust Band Clamp Sleeve - 2pcs by EVIL ENERGY
img 3 attached to 🔧 2.5 Inch Stainless Steel Butt Joint Exhaust Band Clamp Sleeve - 2pcs by EVIL ENERGY
img 4 attached to 🔧 2.5 Inch Stainless Steel Butt Joint Exhaust Band Clamp Sleeve - 2pcs by EVIL ENERGY

Description of 🔧 2.5 Inch Stainless Steel Butt Joint Exhaust Band Clamp Sleeve - 2pcs by EVIL ENERGY

Joins 2.5" OD pipe to 2.5" OD pipe, besides, we offer you 6 different sizes and you would better measure before purchase. These butt clamps feature unitized construction which minimized part number complexity and maximizes material efficiency for reduced weight. Width of strap: 3inch (76.2mm). Package: 2pcs. Application: Butt joint band 2.5" exhaust clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service. Aslo can be used to repair exhaust pipes. Distributes the clamping force evenly over the entire 360° to prevent leaks and control material distortion. No welding design makes easy and less time consuming to install or remove. The 2 1/2 exhaust clamp come with an I-block which creates a complete "Inner-circle Seal" when clamping. Can create a better seal, helping prevent exhaust gas and noise leaks. Material: 304 stainless steel band, zinc-plated M10 flange bolt and nut, steel gasket, aluminum alloy I-block. The exhaust clamp has strong strength, good durability, great appearance and anti-corrosion advantage. Torque: 63 N·m. Note: There is a flat face and arc curved face on the I-block , please put the arc curved face toward to the exhaust pipe make sure to get the tight close. EVIL ENERGY provide this product have 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service.

Reviews

Global ratings 4
  • 5
    3
  • 4
    0
  • 3
    0
  • 2
    0
  • 1
    1

Type of review

Revainrating 5 out of 5

Ideal (simple) and reliable solution

This is a great solution when you need to easily replace an exhaust pipe section without having to remove multiple pipe sections to connect to the flare. I used it to replace a rusty resonator on a 2012 F250. A standard 3 inch piece of hose goes to the back of the muffler and then to this connection in front. The connection is really strong and very close despite some reports to the contrary. I am 100% satisfied. Hell, if I later want to take the pieces apart and make a Flare connection I can…

Pros
  • Note. There is a flat surface and an arc surface on the I block, please place the arc surface toward the exhaust pipe, make sure it is closed tightly. EVIL ENERGY grants a 3-month guarantee on this product. We value your shopping experience and strive to provide quality products and services.
Cons
  • Not bad, but...

Revainrating 1 out of 5

Exactly what I needed - exhaust and emissions

My old rusted exhaust was so badly soldered to scrap I had to cut it off - the muffler pipe wouldn't slide out of the flared end like it should. Now, upon installing the new muffler, I obviously couldn't fit the *new* pipe into the old flared end as a piece of the old muffler pipe was stuck inside. Enter this simple but effective butt splice clip. I simply cut the new pipe to the correct length to create a butt joint, tied this band clamp and tightened everything. Works great and seems to have…

Pros
  • Application: Butt Joint Clamp The 2.5" exhaust clamp is a simple and effective way to connect exhaust system components such as pipes, mufflers and catalytic converters.
Cons
  • Questionable purchase for elderly

Revainrating 5 out of 5

The dimensions are wrong and the fittings are not perfect.

I need to replace my old 2.5" coupler on my exhaust with rusted bolts. This particular piece is just over 2.5 inches when clamped all the way down, while needing to be slightly less to create a tight seal. You will also need two different size wrenches/bits to tighten them. That in itself is normal; However, keep in mind that you will need deep sockets if you want to do this. Another thing to note is that the bolts taper towards the top edge on one side, which makes it easy for your…

Pros
  • Connects 2.5" OD pipe to 2.5" OD pipe, also we offer 6 different sizes for you, better measure them before purchasing. These bump clamps feature a unified design that minimizes part number complexity and maximizes material efficiency for weight reduction. Tape width: 3 inches (76.2 mm). Package: 2pcs
Cons
  • Low Repairability

Revainrating 5 out of 5

Necessary for bending steel pipes.

I purchased a Walker 47993 (2" diameter - 7 foot length) 16 gauge straight exhaust pipe (Revain) for making a motorized bicycle or moped, but I needed something to sand the pipe with and tighten it tightly to avoid warping and unwanted flexing of the pipe when bending at a 90 degree angle. These exhaust clamps are built like a brick toilet. To use these I cut a disc out of 1/4" steel plate along with it an outside diameter equal to the inside diameter of the shock joint collar, rivet it in…

Pros
  • Distributes the clamping force evenly over the entire 360° circumference to prevent leakage and material deformation. The weld-free design simplifies assembly and disassembly and takes less time. The 2 1/2 outlet yoke comes with an I-block that creates a complete "inner seal" when clamped. Can create a better seal and help prevent exhaust leakage and noise.
Cons
  • Functionality