💡 Enhanced Feit LEDR56 827 Dimmable Retrofit for Optimal Lighting Experience Review

I've replaced most of the incandescent bulbs in my house with retrofit FEIT bulbs like these. They produce more light than the 100W bulbs they replaced, while using less power and much less heat. Replacing lamps is a very simple task -1. When turning off, remove the existing lightbulb2. Pull the light down by the trim ring and squeeze the struts to remove, 3. Screw in the modified adapter where the bulb was, connect the wires to the plastic connector if you haven't already , and 4. replace the…

I love these things. I've had old filament cans (Halo and Capri) and all of these mods take 5 minutes to replace the old components in the can. The ones I used used springs to hold the lamp bezel in place, but the jars still had the "ears" needed to install them. They take the intestines from the jar - a bulb, a lining and pieces. Screw the lamp base adapter into the existing socket. Insert the new bracket into the pigtail of the lamp socket adapter. While holding the new mount, pinch the two…

I chose the Feit LEDR56/827 because of the price, features and positive reviews. During a recent interior renovation I installed 25 of these including one over the bath, 4 in each bedroom and several on the vaulted ceiling. The contractor was installing 6" recessed housings with traditional lampholders before I found that many LED recessed lights did not come with sockets for traditional lampholders. /LED digital dimmer and generally satisfied with the result.The lamps turn on instantly and dim